HATCHY Posted June 19, 2006 Share Posted June 19, 2006 Im trying to get my oil pump off I got it of But I cant clear the main pully.. How do the pulley Off. Clockwise or counter. And I cant get my flywheel to stop moving when I wrech on it.. its i:banana: n 4 wheel drive and reverse but it wont lock it up.. ANY SUGGESTIONS.. NOW i have two broken punches floating around inside my tranny and a brocken screwdriver! Link to comment Share on other sites More sharing options...
mdjdc Posted June 19, 2006 Share Posted June 19, 2006 Put a wrench on the main crank bolt with a breaker bar on it set it against the fender (with Padding) and hit the starter. That should loosen the bolt and allow you to get the main pulley off. Good Luck Link to comment Share on other sites More sharing options...
hooziewhatsit Posted June 19, 2006 Share Posted June 19, 2006 you can also remove a spark plug, then thread as much rope (non-fibrous) into the cylinder as will go. Then slowly crank the engine over by hand until it stops, then you can loosen/tighten the crank pulley bolt. Link to comment Share on other sites More sharing options...
HATCHY Posted June 20, 2006 Author Share Posted June 20, 2006 THANKS FOR THE HELP I ACTUALLY USED A SCREWDRIVER AND LOCKED ON TO THE FLYWHELL AND GOT THE PULLY OFF THANKS FOR THE THOUGHTS I WANT TO TRY THE ROPE ONE TO THATS A GOOD IDEA:cool: Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now