TheSubaruJunkie Posted June 24, 2006 Share Posted June 24, 2006 Im finishing up my weber install... last thing I gotta do is wire the electric choke? What do I tap into??? THanks, -Brian Link to comment Share on other sites More sharing options...
GeneralDisorder Posted June 24, 2006 Share Posted June 24, 2006 Should be a 3 wire connector for the Hitachi - two of those are hot in run at all times - one is for the electric choke on the Hitachi, and the other is for the idle fuel cut solenoid. Just take the pig-tail off the Hitachi, and run the same wire to the choke that was being used before. GD Link to comment Share on other sites More sharing options...
TheSubaruJunkie Posted June 24, 2006 Author Share Posted June 24, 2006 Gotchya.... thanks -Brian Link to comment Share on other sites More sharing options...
Flowmastered87GL Posted June 25, 2006 Share Posted June 25, 2006 Make sure to insulate the unused wires well plus make sure the choke wire is on there nice and tight. Mine came free once and made be blow a fuse :-\ Link to comment Share on other sites More sharing options...
GeneralDisorder Posted June 25, 2006 Share Posted June 25, 2006 Make sure to insulate the unused wires well plus make sure the choke wire is on there nice and tight. Mine came free once and made be blow a fuse :-\ Yes indeed - and on the EA81 that same fuse controls the Brake lamps , so you'll know real quick when the cops pull you over. GD Link to comment Share on other sites More sharing options...
TheSubaruJunkie Posted June 25, 2006 Author Share Posted June 25, 2006 Ah... good point, i left them hanging there. I'll have to make sure i go back and take care of that. -Brian Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now