floater Posted July 3, 2006 Share Posted July 3, 2006 I thought the electrical connector in the engine compartment would be the easy part compared to the actual sensor. I need to reuse the connector as I bought a Bosch universal one. How does the gray connector come apart. I pushed in with a screw driver on the little tabs and used a needle nose plier but nothing seems to make it separate. 96 Outback:-\ Link to comment Share on other sites More sharing options...
skizix Posted July 4, 2006 Share Posted July 4, 2006 Well, my '02 has a grey connector with an unusual way to undo it. No idea if it's the same, but if it is... ...the grey part is "hinged" on one end (the non-sensor end), and swings out of the way like a door, once you compress the tabs. Then the connector unplugs easily. When you re-install, make sure the hinged part is seated properly on it's round projections (the pivots/hinges). It comes off of those pretty easily when the "door" is open. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now