Uberoo Posted July 30, 2006 Share Posted July 30, 2006 does anyone have a plan for the EJ-EA adapter plate? I am confident I could make the plate but I am not sure exactly how it goes together.How does the plate bolt to engine?to trans? Link to comment Share on other sites More sharing options...
[HTi]Johnson Posted July 31, 2006 Share Posted July 31, 2006 What I'm going to do is trace the outline of the tranny and engine bell housing and the holes. then compare them. Link to comment Share on other sites More sharing options...
monstaru Posted July 31, 2006 Share Posted July 31, 2006 i cut an old 4 spd d/r bellhousing and baccaruda used it to make a template..... were pretty close i am sure you could come up and at least get a drawing off of it. Link to comment Share on other sites More sharing options...
Uberoo Posted July 31, 2006 Author Share Posted July 31, 2006 I'll come up to spokane when I need to pick up an ej engine from pull and save.How hard are XTs to find?or should I just get a XT clutch online?If gas prices werent so expensive I would be up there 5 minutes ago Link to comment Share on other sites More sharing options...
baccaruda Posted July 31, 2006 Share Posted July 31, 2006 I haven't seen an XT6 at pull N save in over a year. EJ engines are readily available there, of course in various conditions. There are a couple new Legacies there this week and one of them had a replacement engine in it... The adapter plate is simple. The procedure has been discussed a few times, if you do a search in the advanced mode, you will find it in the Retrofitting forum... I've discussed it there as well... read through some of these and then if you have more questions, post them back here instead of in the old threads. Also remind us of what kind of subaru they're going into? Link to comment Share on other sites More sharing options...
WoodsWagon Posted July 31, 2006 Share Posted July 31, 2006 I could send you a copy of the plans my father drew up. It's coordinates to mill off of, and the plate we made fit perfect. PM me with your adress Edit: I'm in the middle of hooking up my wiring for the car, so I won't be able to do anything else for a couple of days. I've got my court date thurs morning, so I'll see about making copy's thurs afternoon. Possibly a small fee, I'll see. Link to comment Share on other sites More sharing options...
baccaruda Posted July 31, 2006 Share Posted July 31, 2006 If you're willing, I'll bet that adapter plate plan would be welcome in the USRM.. My plate fit OK but I would'nt say "perfectly" Link to comment Share on other sites More sharing options...
tsutomu Posted July 31, 2006 Share Posted July 31, 2006 didnt allied armament make a plate for this? i dont know if they are still going to sell them, but im pretty sure they made them. http://alliedarmament.homestead.com/EAEJ.html Link to comment Share on other sites More sharing options...
Numbchux Posted July 31, 2006 Share Posted July 31, 2006 didnt allied armament make a plate for this? i dont know if they are still going to sell them, but im pretty sure they made them.http://alliedarmament.homestead.com/EAEJ.html they didn't make them, the distributed them for 88hatchmonster. you can still order them through him. check for a link to his site in either the vender's forum, or the large thread here in the retrofitting forum about the swap. Link to comment Share on other sites More sharing options...
Huck369 Posted August 4, 2006 Share Posted August 4, 2006 I could send you a copy of the plans my father drew up. It's coordinates to mill off of, and the plate we made fit perfect. PM me with your adress Edit: I'm in the middle of hooking up my wiring for the car, so I won't be able to do anything else for a couple of days. I've got my court date thurs morning, so I'll see about making copy's thurs afternoon. Possibly a small fee, I'll see. 91 Loyale, I'd like a copy to if it isn't too much to ask, and if it's in a Cad program, you could just e-mail it to me in a DWG or DXF file. Thanks, Huck Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now