porcupine73 Posted August 1, 2006 Share Posted August 1, 2006 What kind of seal puller/method do ya'll use to pull the cam and crank seals? Pictures and links would be appreciated. I've never pulled a seal before; I have a Lisle seal puller, but it seems like it's kind of big for this job (maybe more suitable for wheel bearing seals er somethin). -Louis Link to comment Share on other sites More sharing options...
svxpert Posted August 1, 2006 Share Posted August 1, 2006 <<What kind of seal puller/method do ya'll use to pull the cam and crank seals? >> very small flat head screwdriver. tap it into the seal or between the seal and housing. be sure not to scratch the metal. Link to comment Share on other sites More sharing options...
porcupine73 Posted August 1, 2006 Author Share Posted August 1, 2006 Thanks for the info! Hm...simple, cheap, I'll give it a go Link to comment Share on other sites More sharing options...
idosubaru Posted August 1, 2006 Share Posted August 1, 2006 another way is to drill a tiny hole in the face of the seal and use a self tapping sheet metal screw. screw the screw into the hole and use a hammer or pliars to pull. don't get anything near the machined sealing surfaces. don't want to scratch those. Link to comment Share on other sites More sharing options...
avk Posted August 1, 2006 Share Posted August 1, 2006 I used this one, http://www.sears.com/sr/javasr/product.do?pid=00947091000 It's the ultimate bent screwdriver. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now