superu Posted August 3, 2006 Share Posted August 3, 2006 I'm wanting to do a disk brake set up in the rear of my 95 legacy. Wil the set up from an '89 legacy wagon bolt up in my 95 legacy sedan? The mounting looks the same, but i have not put the cars side by side and measured things... Link to comment Share on other sites More sharing options...
Free Range Posted August 3, 2006 Share Posted August 3, 2006 yup, direct swap, the e-brake will be a little funky to get hooked up but shouldn't be too big of a deal, just some little clips, a drum brake tool will be a huge help getting things back together too. Link to comment Share on other sites More sharing options...
superu Posted December 7, 2007 Author Share Posted December 7, 2007 sorry for the delay, but i got it done this summer with Mudrat. It was a bolt-on deal, although the openning for the E-brake cable was smaller in the disk setup vs. the stock drub setup... The main cable goes through fine, but it does not "clip" in, so with some heat-shrink wrap, the line is set fine.. Thanks! -mw- Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now