Weber Install Q about Valve Cover intake

[Ryanb]

Exactly how do I hook up the breather hoses for the valve covers and the pcv valve? Right now I have on the PS a single small filter on its own. On the DS I have a hose coming out the bottom of the weber air fliter to a T that goes to the PCV and the valve cover. Is this right? I thought I knew, but I have looked at others that just ran the PCV straight to the DS valve cover, and even others that have run the wait filter from the weber straight to the DS valve cover but not involved the PCV.

 

A picture would be most helpufll. Thanks.

[TheSubaruJunkie]

Just connect a filter to each line that would usually run back to your stock air filter box. Kragen or Autozone should sell small filters that will work.

 

I'd get a pic of my setup, but im being lazy today... im sure someone out there has one tho.

 

-Brian

[monstaru]

what you did is what i did.and it does eem to work.i remember seeing it like that on edrach's brat and pretty much modeled it after that.i got rid of the rest of the canister as well.i am still trying to decide if that was a smart idea.cheers, brian

[Loyale 2.7 Turbo]

Hi!, I´ve covered almost all ´bout here:

 

http://www.ultimatesubaru.org/forum/...ad.php?t=53143

 

I suggest you see all my thread, ´cos there you´ll find the intake manyfold work to do, along how to hook hoses ideas, photos, etc...

 

Good Luck!

[Ryanb]

Thanks. That was exaclty what I needed