Jump to content
Ultimate Subaru Message Board

01 Legacy GT Turn Signal affects Tack & Spedo


Recommended Posts

I'm new to the group and Subarus. I'm familiar with "Searching" forums, unfortunately, I've not found an answer on this forum.

 

a] "Brake, ABS, Battery" are illuminated on instrument cluster.

b] Activating turn signal, Tack & spedo go to "0" and return to normal with each pulse of turn signal light.

c] Activating AC causes "Add Oil / Temp" to illuminate.

 

I'm familiar with diagnosing and fixing electrical problems. [i have 1988-9 Merkur Scorpios that have "many" electrical problems.] However, I have electrical schmetics for them, but none for the Subaru.

 

Your suggestions are appreciated

Bob

PS Subaru has only 43,xxx miles and NO trailering harness that I'm aware of.

Link to comment
Share on other sites

weird electrical problems can be traced to either the altenator or a light bulb. Check the alt and battery. if they are Ok then remove all the turn signal and brake lamps and see if it goes away. Slowly replace them untill it returns, and that is where your problem is. Can be a bad bulb or socket.

 

nipper

Link to comment
Share on other sites

Back to basics. Alternator only producing 9 volts. Initially I didn't want to accept a "quality" import alternator only lasting 42,### miles. I wonder how long the domestic remanufactured alternator will last.

 

nipper wrote

<lb. Check the alt and battery. if they are Ok then remove all the turn signal and brake lamps and see if it goes away.>

 

Acts just like a Scorpio.

 

 

Bob

Thanks for the help.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...