hancho3 Posted September 2, 2006 Share Posted September 2, 2006 OK, so I broke off the bleeder valve in the caliper, and then I broke an easy out in the bleeder valve, and then my drill bit slipped when i was trying to drill out the easy out, and ruined the threads on my Drivers side caliper. Im wondering if there is anybody out there who has the Calipers for the non vented rotors sitting around after doing the conversion to vented rotors. Please let me know if you have the part available anybody. It would be much appreciated thanks, -Kurt Link to comment Share on other sites More sharing options...
mikeshoup Posted September 2, 2006 Share Posted September 2, 2006 Try posting in the wanted section of the classifieds. Link to comment Share on other sites More sharing options...
Caboobaroo Posted September 2, 2006 Share Posted September 2, 2006 AND you need a gen 1 caliper my friend, not a gen 2. You can however, swap some vented rotors and calipers over and they'll bolt onto you stock hubs. Much better braking performance. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now