Adam N.D.J. Posted November 7, 2003 Share Posted November 7, 2003 Ohkay, I've got my EA81T with a 4wd Auto. Well, when I bought it about 2 years ago I noticed that the passenger side inboard boot was gone, and that the joint was dry, not a sign of grease to be had in there. Well, I left it like that. I've been driveing it on like that for 2 years now. On the free way last night the joint was shaking so bad I thought the wheel or hub was coming off. It was like this for the nearly 30 mile trip home. I let it sit over night, and the next day, it drives like normal. So today I'm trying to kill the axle, stomping the gas at every light, shifting at like 5-5.5K, nothing will kill this friggin axle!!!! If this was one of my manual cars, the axle woulda blown as soon as it got a tear in the boot (which has happened to me a couple times). And my tranny doesn't have the normal slushy shifts that are the norm, it has hard positive shifts that you can really feel in the seat of the pants. ARG!!! It wouldn't be so bad, except that that axle is knocking and clicking so loud it can be heard over the stereo, or 2 blocks away if your outside the car, and I can't replace it because I told the wife that in a 4wd car you don't need to replace an axle untill it's been confirmed dead! Link to comment Share on other sites More sharing options...
harpua Posted November 7, 2003 Share Posted November 7, 2003 *IDEA* Pull the axle out of the car. Put it on a hard flat surface. Go get a big sledge hammer. Proceed to beat the living hell out of the axle. Put the sledge down. Confirm death of axle. Continue to put a new axle into the car. When done stop and think about how much fun it was to beat the bearings out of the axle. Proceed with your day. Hope this helps....its what i would do anyway.... later Link to comment Share on other sites More sharing options...
JWX Posted November 7, 2003 Share Posted November 7, 2003 that sounds like fun:D Link to comment Share on other sites More sharing options...
Turbone Posted November 7, 2003 Share Posted November 7, 2003 You should know by now that nothing ever breaks when your expecting it. Let your wife drive it for a few days:brow:Always worked for me. Dont tell her I said that tho:eh: Rob Link to comment Share on other sites More sharing options...
Adam N.D.J. Posted November 7, 2003 Author Share Posted November 7, 2003 Yeah, those are two options that I've been considering. Problem with plan B is that Bek won't drive my car, it scares her. She's used to learned to drive in an EA71 Brat, now she drives the SPFI 3 door, so when she gets into the boost, it scares her. Plan A is to intentionally sabotage the axle, I've been thinking of packing rocks into the cup, then taping it up and taking it around the block, with my luck though, I'd get home and just have a cup full of finely powdered rocks. Maybe I'll just yank it out of there and stick a stub in the front untill I get enough cash to buy an axle myself. Link to comment Share on other sites More sharing options...
trooperjeep Posted November 7, 2003 Share Posted November 7, 2003 Or you just do the old redneck fix and... * wash it down with lacquer thinner * wipe it clean with your t-shirt * smear it with grease * and wrap it up in duct tape! Probably be good for another 1000 miles! T.J. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now