Toms Brats Posted September 5, 2006 Share Posted September 5, 2006 Talked to my sign man today, said he could do graphics for about $220.00. If I could get others together that wanted them. Is this a good price or not? Tom Link to comment Share on other sites More sharing options...
SUBARU3 Posted September 5, 2006 Share Posted September 5, 2006 I can beat that price by $100.....shipped! I have had over a dozen made. They are like the original stripes. You can have your choice of background color and "BRAT" lettering color. The multicolor strips are pretty standard. You can add the "SUBARU" lettering, as seen in the pic for $15 extra. http://www.ultimatesubaru.org/Litera...978-brat-a.jpg Todd Link to comment Share on other sites More sharing options...
bryanthompson Posted September 6, 2006 Share Posted September 6, 2006 I can beat that price by $100.....shipped! I have had over a dozen made. They are like the original stripes. You can have your choice of background color and "BRAT" lettering color. The multicolor strips are pretty standard. You can add the "SUBARU" lettering, as seen in the pic for $15 extra. http://www.ultimatesubaru.org/Litera...978-brat-a.jpg Todd I CAN ATTEST TO THE QUALITY OF TODD'S GRAPHICS- THEY ARE CRISP, CLEAN AND, MOST IMPORTANTLY, THEY ARRIVE RIGHT AWAY. BT Link to comment Share on other sites More sharing options...
REXSPEEDWORTHY Posted September 12, 2006 Share Posted September 12, 2006 I can beat that price by $100.....shipped! I have had over a dozen made. They are like the original stripes. You can have your choice of background color and "BRAT" lettering color. The multicolor strips are pretty standard. You can add the "SUBARU" lettering, as seen in the pic for $15 extra. http://www.ultimatesubaru.org/Litera...978-brat-a.jpg Todd I need some for my 79 DL with just "SUBARU" on them. Like this one was, but in yellow. And then one in silver to match my wheels for my LGT also with "AWD" on it, kinda like this freaks:lol:, but not AWD spelled out. Link to comment Share on other sites More sharing options...
SUBARU3 Posted September 12, 2006 Share Posted September 12, 2006 Since this is run in a continous stripe, I would need to know how much plain stripe you would want in front of the word SUBARU and the distance from the end of SUBARU to the start of the letters AWD. (Of course you can cut between the doors. Do you want AWD in caps and in the same font as SUBARU? So you need a yellow and in silver? Could you send be a sample of the yellow you are wanting. I know the wheel color. Todd Link to comment Share on other sites More sharing options...
Caboobaroo Posted September 13, 2006 Share Posted September 13, 2006 Todd, can you have the GL stripe kit made as well for the Brat? Its the stripe, that besides the targa stripe, runs from the front fenders all the way around the back. Its the same kind of striping on Laura's Brat seen here... Let me know Todd as I am looking for a set for my Brat as well. Don't know what color I want to go with but I'm thinking silver... Link to comment Share on other sites More sharing options...
SUBARU3 Posted September 13, 2006 Share Posted September 13, 2006 Hmm....I don't have measurements for that stripe. That could be a challenge. Let me see what I can figure. Todd Link to comment Share on other sites More sharing options...
Caboobaroo Posted September 13, 2006 Share Posted September 13, 2006 Hmm....I don't have measurements for that stripe. That could be a challenge. Let me see what I can figure. Todd Ok sounds good. If you need some help with measurements, I have 2 gen 1 Brats I can get them from! Neither have any striping on them though... Link to comment Share on other sites More sharing options...
cubastreet Posted September 13, 2006 Share Posted September 13, 2006 That trippple stripe on the red brumby looks awesome! Link to comment Share on other sites More sharing options...
mcbrat Posted September 13, 2006 Share Posted September 13, 2006 Todd, can you have the GL stripe kit made as well for the Brat? Its the stripe, that besides the targa stripe, runs from the front fenders all the way around the back. Its the same kind of striping on Laura's Brat seen here... Let me know Todd as I am looking for a set for my Brat as well. Don't know what color I want to go with but I'm thinking silver... Ed Dahl does the gen1 brat stripes too, in single color. not sure which style again... dahled@aol.com Link to comment Share on other sites More sharing options...
REXSPEEDWORTHY Posted September 13, 2006 Share Posted September 13, 2006 Since this is run in a continous stripe, I would need to know how much plain stripe you would want in front of the word SUBARU and the distance from the end of SUBARU to the start of the letters AWD. (Of course you can cut between the doors. Do you want AWD in caps and in the same font as SUBARU? So you need a yellow and in silver? Could you send be a sample of the yellow you are wanting. I know the wheel color. Todd on the LGT I need silver, with "SUBARU=========AWD" I'll have to measure those too. Here is a pic of LGT OK on the DL Yellow just "SUBARU" as yellow as you can get it. Here is a pic of the car. I'll have to get measurements tonite. It seems you can do these, gotta price? Again I'll try to get measurements tonite. Link to comment Share on other sites More sharing options...
REXSPEEDWORTHY Posted September 13, 2006 Share Posted September 13, 2006 Ed Dahl does the gen1 brat stripes too, in single color. not sure which style again... dahled@aol.com This is the dude I emailed a little while back I think. He just got back to me this morn, and needs all kinds of measurements. I just want some stripes, I'll use whomever it is easier for. \ I don't wanna piss anyone off or hurt feelings. I just didn't think dahled was gonna get back to me. huh Link to comment Share on other sites More sharing options...
Toms Brats Posted September 13, 2006 Author Share Posted September 13, 2006 The stripes like on Laura's brat & mine are the ones my friend took measurements for. Thats what he priced at around $200.00. Tom Link to comment Share on other sites More sharing options...
SUBARU3 Posted September 14, 2006 Share Posted September 14, 2006 Hey Rex...no hurt feelings......I just do it to help out. It's not my living. Go with Ed. FYI My Gen 1 stripes (BRAT) are factory multi colored. I could make then 1 color too. The rally lower door SUBARU stripe, can be made in any color. I really don't need much of a measurement on that, as I just allow plain strip of 12" in front of the word SUBARU for each side. I just need to know the total length you need. Caboo.....you might go with Ed too , as he may have the work already done on the wrap around measurements. Todd Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now