Jump to content
Ultimate Subaru Message Board

Recommended Posts

Hi all,

 

Can you replace the duty solenoid c without removing the tranny tail housing? I am getting a code 24 with is the solenoid. Tomorrow I am going to get under the car & check the solenoid. I would like to know so I can buy the gasket while at the dealer getting the solenoid. Thanks.

Link to comment
Share on other sites

nope, you have to remove the rear extension housing to get at the duty c solenoid.

 

Make sure you test the wiring to the solenoid to make sure that's not the problem.

 

What symptoms are you having, other then light being on & that code stored.

Link to comment
Share on other sites

Josh,

 

Bad torque bind. Installing the fuse helps a little but when I check the duty solenoid I get a open. From what I can find that will put the AWD into 50/50 regardless of the fuse. I have already checked tires & changed all the fluids. Anything I might have overlooked? Thanks.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...