s'ko Posted September 12, 2006 Share Posted September 12, 2006 So had this GL-10 that I scrapped and I had the trunk left over. so with a welder and a butt load of scrap steel around you can built anything.. Took two 2 inch angle pieces and welded then to the rear of the trunk lid. Took a long 1/2 square tube and welded it between the two angle pieces. This formed the anchoring point for the rear of the table. Made some braces out of 1" x 1/2" solid bar and then secured them to the 2x4 in my garage. Placed the trunklid on top and then used a c-clamp to secure the braces to the rear bar. Weld to pieces together. Then weld the front of the braces to the trunk lid. I made the table about hip height so it's comfortable to work with while standing up. Will take pictures tomorrow b/c it's took dark. welders rule.... BW Link to comment Share on other sites More sharing options...
Alex GL-10 Posted September 21, 2006 Share Posted September 21, 2006 Where are those pictures at? I wanna see! Link to comment Share on other sites More sharing options...
s'ko Posted November 10, 2006 Author Share Posted November 10, 2006 ok so here are some pictures. here is a picture of the brace One more thing that I did w/some left over parts. I took a gas tank and some steel wheels and made a parts cleaner. there part in the cleaner is 1/2 of an ea81 block. Here is the other half all nice and clean. BW Link to comment Share on other sites More sharing options...
Flowmastered87GL Posted November 10, 2006 Share Posted November 10, 2006 Wow that is redneck ingenuity Link to comment Share on other sites More sharing options...
s'ko Posted November 10, 2006 Author Share Posted November 10, 2006 yeah. work's been really slow so I have had a lot of time on my hands. I am proud to be a member of the Crimson Napes. BW Link to comment Share on other sites More sharing options...
backwoodsboy Posted November 10, 2006 Share Posted November 10, 2006 Wow that is redneck ingenuity ....aint nuthin better-n that! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now