Phillip Posted October 2, 2006 Share Posted October 2, 2006 I need to replace the rear wheel bearings on my '99 OBW and have access to a Hub Tamer. Has anyone on this board used one, and if so, do you have any advice for me before start? Second question, my parts book shows 3 seals, one of which is $52. Is there a better (cheaper) place to buy them? Sure appreciate any advice! Thanks Link to comment Share on other sites More sharing options...
LanceGillette Posted October 4, 2006 Share Posted October 4, 2006 There is a six page instruction document at http://endwrench.com/images/pdfs/WheelBearing.pdf There is also a much longer set of instructions (more than 20 pages) online but I didn't find it just now (document #MSA5TT0201). I printed it recently. Link to comment Share on other sites More sharing options...
LanceGillette Posted October 4, 2006 Share Posted October 4, 2006 Here is the URL for the longer more detailed 20 page document: http://www.endwrench.com/current/Current6/03/Wheel%20Bearing%20PDFs/MSA5TT0201.pdf Link to comment Share on other sites More sharing options...
carfreak85 Posted March 25, 2020 Share Posted March 25, 2020 Both links are now dead... Link to comment Share on other sites More sharing options...
heartless Posted March 25, 2020 Share Posted March 25, 2020 6 hours ago, carfreak85 said: Both links are now dead... something from 14 years ago, I would imagine so.. Link to comment Share on other sites More sharing options...
Numbchux Posted March 25, 2020 Share Posted March 25, 2020 (edited) Also there's a sticky in this section with new sources for the Endwrench articles. Or, google the document #. Edited March 25, 2020 by Numbchux 2 Link to comment Share on other sites More sharing options...
Mike104 Posted March 30, 2020 Share Posted March 30, 2020 Here is a link to the file http://share.subiefiles.com/subiefiles/technical reference/official/Wheel Bearing Installation Guide.pdf I can't upload it as it is too large a file and since it it protected I can't optimize it Link to comment Share on other sites More sharing options...
CNY_Dave Posted March 31, 2020 Share Posted March 31, 2020 Couldn't open it, adobe sw says file's corrupt Link to comment Share on other sites More sharing options...
Rampage Posted March 31, 2020 Share Posted March 31, 2020 31 minutes ago, CNY_Dave said: Couldn't open it, adobe sw says file's corrupt Right click (right mouse button) on the posted link and then left click on "Save Target As". Select a folder and Save. Then open it with (updated) Adobe Reader DC. 2 Link to comment Share on other sites More sharing options...
Mike104 Posted April 1, 2020 Share Posted April 1, 2020 Thanks Rampage. The link opened for me though Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now