PoorManzImpreza Posted November 12, 2003 Share Posted November 12, 2003 ok guys my parts EA71 has a rusty clutch on it I've loosened all the pressure plate bolts but the damn thing won't come free of the clutch any ideas? Link to comment Share on other sites More sharing options...
MaroonDuneDoom Posted November 12, 2003 Share Posted November 12, 2003 i reccommend beer and a prybar, jk. try a prybar w/some rubber between the clutch and pressure plate. you'd have to be really careful though. you probably should waight for someone w/some experience to tell you how to properly do it. well, at least this will put her on the top for ya. good luck Link to comment Share on other sites More sharing options...
PoorManzImpreza Posted November 12, 2003 Author Share Posted November 12, 2003 LOL thanks for the bump *bump* Link to comment Share on other sites More sharing options...
XSNRG Posted November 12, 2003 Share Posted November 12, 2003 There are two or three little aligning pins. Sometimes the pressure plate get stuck on them. You should be able to see them coming through the pressure plate near the outer edge. they are about 1/8" in diameter. If you can gently pry under the pressure plate near each one, working a little at a time, it should come off. You could spray a little penatrant directly on the alignment pins too. Good Luck! Link to comment Share on other sites More sharing options...
MaroonDuneDoom Posted November 12, 2003 Share Posted November 12, 2003 BARBADOS huh? haha me too. barbados, wyoming Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now