MaroonDuneDoom Posted November 12, 2003 Share Posted November 12, 2003 i'm going to flush my radiator/heater core and i am wondering how to pull the core w/minimal headaches. thanks all Link to comment Share on other sites More sharing options...
trooperjeep Posted November 12, 2003 Share Posted November 12, 2003 According to yea' old Hyanes manual... it looks like a pain in the rump roast. I'm not a doctor, nor do I play one on TV, so my advice to avoid headaches is to drink heavily. T.J. Link to comment Share on other sites More sharing options...
trooperjeep Posted November 12, 2003 Share Posted November 12, 2003 Heater Core http://www.cybrrpartspro.com/Chilton%20Manuals/8797m/8797CH06_15.html T.J. Link to comment Share on other sites More sharing options...
dave valiant Posted November 12, 2003 Share Posted November 12, 2003 If you are going to just flush the heater core couldnt you pull the heater hoses hookup a flush tee to the heater hose cap off the other side of the tee hook up a garden hose and flush. never tried this just a suggestion, but it sounds easier than pullin the core. Link to comment Share on other sites More sharing options...
toybuilder Posted November 12, 2003 Share Posted November 12, 2003 I am currently replacing the heater core in my wife's soon to be Loyale, and I can certainly agree with trooperjeep, heavy drinking is the only way to make this job tolerable. Not only was the cost of the replacement heater core painfull, the entire job sucks! Good thing that I love this car!! Give it your best shot at a flush... Link to comment Share on other sites More sharing options...
old sub freak Posted November 12, 2003 Share Posted November 12, 2003 yes to pull the core by the book is a JOB! what i have done on e81s is to use a dremmel tool and cut it out.its still a lot a of work but better then pulling the whole show out. it slides out like a tape deck and slide the new one back , little silicone. HEAT!! do try flushing first. i've saved a few that way .stay warm todd duh! i was trying to answer the guy with heater core problem. live and learn Link to comment Share on other sites More sharing options...
baccaruda Posted November 12, 2003 Share Posted November 12, 2003 you can't do the cut and paste method with an EA82 car. gotta do it the hard way. try flushing it first and flush the rest of your system too while you're at it. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now