benebob Posted November 3, 2006 Share Posted November 3, 2006 Okay so I'm going forward with the XT turbo 2wd 5 speed into my XT6. Got everything on the way aside from a starter and clutch cable. Starter is just a M/T starter for any of the ea-82s right? In fact I can reuse my just remaned one with a M/T front right? As for the clutch cable this is a little more confusing. Tranny is out of an 86 XT 2wd turbo. I can't seem to find consistant listings for cables. Some manufactures lump all the non-turbos and turbos together, others split 'em apart etc. Just trying to get the cheapest one I can at the moment! Link to comment Share on other sites More sharing options...
GeneralDisorder Posted November 3, 2006 Share Posted November 3, 2006 Go to the dealer - the clutch cables are only like $20, and you are guaranteed to get the right one. GD Link to comment Share on other sites More sharing options...
benebob Posted November 3, 2006 Author Share Posted November 3, 2006 Go to the dealer - the clutch cables are only like $20, and you are guaranteed to get the right one. GD No I live in Lancaster County where my dealer insists on a Vin (which I don't have) and then charges 50% over list. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted November 3, 2006 Share Posted November 3, 2006 Call up the guys at www.subaruparts.com They are a dealership in WA, and will get you what you need. They have excelent prices, and I've dealt with them before. Very good service. Don't be fooled by the fancy web site and such - it's just a dealership in Tacoma WA. Also - that VIN thing is weird. My local dealership (Lithia Subaru in Oregon City) gives me wholesale on everything, and has never asked for a VIN, just model and year. GD Link to comment Share on other sites More sharing options...
benebob Posted November 3, 2006 Author Share Posted November 3, 2006 Call up the guys at www.subaruparts.com They are a dealership in WA, and will get you what you need. GD They screwed me long ago and with shipping across the country I'd pay $35 for something that is worth well $10. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted November 3, 2006 Share Posted November 3, 2006 Call them, get the part number and price, and order it locally then. GD Link to comment Share on other sites More sharing options...
benebob Posted November 3, 2006 Author Share Posted November 3, 2006 Thanks for the no help. I know someone out there has a better answer then get it from the dealer. My 17 month old could've told me that one. Obviously I'd prefer not to deal with my local dealer or have something shipped that will cost as much to ship as to buy. Link to comment Share on other sites More sharing options...
jeffast Posted November 3, 2006 Share Posted November 3, 2006 dealerships are your friend Link to comment Share on other sites More sharing options...
benebob Posted November 3, 2006 Author Share Posted November 3, 2006 dealerships are your friend That's the funniest thing I've heard all year! Link to comment Share on other sites More sharing options...
GeneralDisorder Posted November 3, 2006 Share Posted November 3, 2006 Aftermarket clutch cables suck. Period. End of story. The OEM cables are excelent quality, and besides that, cheap. I've had at least 3 aftermarket units crap out on me, and since being replace with OEM I've never had a problem with any of them. Shipping shouldn't be any more from a proper dealer than it is from a web site. Some dealers do have minimum order requirements, but I'm sure you can think of some other stuff to buy. The problem with sugesting what cable you need is that the 2WD 5 speed tranny probably needs a longer cable due to it being a hold-over transmission from the EA81 days. The clutch fork is farther to the passenger side so a normal EA82 5 speed cable will be too short, and the EA81 cable won't have the right pedal end on it. So to avoid complete and utter confusion and to prevent you from aquireing the wrong cable, or a crappy aftermarket unit, I sugested the dealer. It IS without a doubt, your best option. If they want a VIN, start a thread and explain your situation, and ask if someone would be willing to supply your with their VIN in a PM so that you might deal with your unruly dealership. You'll just have to play the game if you want the correct, quality parts. GD Link to comment Share on other sites More sharing options...
jeffast Posted November 3, 2006 Share Posted November 3, 2006 That's the funniest thing I've heard all year!this sounds like the thread this guy started about what clutch to use in an xt-6 AUTO to MANUEL conversion, despite common sense and much experance he was to hard headed to listen Link to comment Share on other sites More sharing options...
subeman90 Posted November 4, 2006 Share Posted November 4, 2006 personally I'd buy one for the car the tranny came out of. Is there a difference between 2wd and 4wd? If not I can give you a vin to an 86 turbo 4wd Link to comment Share on other sites More sharing options...
GeneralDisorder Posted November 4, 2006 Share Posted November 4, 2006 personally I'd buy one for the car the tranny came out of. Is there a difference between 2wd and 4wd? If not I can give you a vin to an 86 turbo 4wd 2WD should be longer - fork is towards the passenger side more. GD Link to comment Share on other sites More sharing options...
dixracing Posted November 4, 2006 Share Posted November 4, 2006 look on your registration slip.....the VIN is there Link to comment Share on other sites More sharing options...
jeffast Posted November 4, 2006 Share Posted November 4, 2006 look on your registration slip.....the VIN is thereread the thread he's doing an auto to manuel swap Link to comment Share on other sites More sharing options...
benebob Posted November 4, 2006 Author Share Posted November 4, 2006 1. It isn't a carry -over from the EA81 as its a 25 spline larger shaft tranny like the 4wds. Only the non-turbos were carryovers 2. The tranny is on a shelf. The vin on my reg is for an 88 XT6 fwd auto. 3. According to my part number its a discontinued part 4. I've never had a non-subaru clutch cable break. Only Subaru cables have broken on me. Link to comment Share on other sites More sharing options...
benebob Posted November 4, 2006 Author Share Posted November 4, 2006 this sounds like the thread this guy started about what clutch to use in an xt-6 AUTO to MANUEL conversion, despite common sense and much experance he was to hard headed to listen Hmmm. I still know it would work and work just fine. I just don't have any Impreza fwd 5 speed axles to use otherwise I would've already done it as no one provided any experience that it won't. I didn't say it will be the strongest set up but that isn't what I asked there now was it that is if you actually read and comprehended what I was asking? Remember, I'm also one of the owners of the fasted stock engined 1/4 mile SVX that isn't juiced at 14.2 in the quarter but its built with things that we were told wouldn't work either. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted November 4, 2006 Share Posted November 4, 2006 1. It isn't a carry -over from the EA81 as its a 25 spline larger shaft tranny like the 4wds. Only the non-turbos were carryovers Stubs are removable. Is it possible that's the only difference? If the fork is to the drivers side then it's a plain old 5 speed 4WD cable. If it's the passenger side it's special. What does the clutch release bearing look like? Is it a two peice or a single peice unit? 3. According to my part number its a discontinued part If that's true, then it quite possibly is a strange cable with the EA81 passenger side fork and the EA82 pedal side. If this is the case, you will probably have to swap an EA81 pedal assembly and use an EA81 cable. 4. I've never had a non-subaru clutch cable break. Only Subaru cables have broken on me. That's bizzare. I've broken NAPA cables, Autozone cables, and one that was just "japan". Never has an OEM cable failed on me with the exception of the high mileage ones I replaced when I aquired a couple of my rigs. GD Link to comment Share on other sites More sharing options...
benebob Posted November 4, 2006 Author Share Posted November 4, 2006 Stubs are removable. Is it possible that's the only difference? If the fork is to the drivers side then it's a plain old 5 speed 4WD cable. If it's the passenger side it's special. What does the clutch release bearing look like? Is it a two peice or a single peice unit? If that's true, then it quite possibly is a strange cable with the EA81 passenger side fork and the EA82 pedal side. If this is the case, you will probably have to swap an EA81 pedal assembly and use an EA81 cable. That's bizzare. I've broken NAPA cables, Autozone cables, and one that was just "japan". Never has an OEM cable failed on me with the exception of the high mileage ones I replaced when I aquired a couple of my rigs. GD The inpute shafts are different as well. I've also been told the stubs aren't the same as well. I don't have the tranny yet which is why I'm posting here looking for the differences and what will work. Link to comment Share on other sites More sharing options...
benebob Posted November 4, 2006 Author Share Posted November 4, 2006 FYI: Cheapest clutch cable for an XT was $65 at Lancaster County Motors this morning. Big difference between the $15 or so for a Brat or EA-82 hatch. Someone has to have a clue on these things out there! Link to comment Share on other sites More sharing options...
GeneralDisorder Posted November 4, 2006 Share Posted November 4, 2006 Try www.XT6.net Lots of XT owners over there, and people that have parted out XT's for their 6's.... probably more knowledge than here. That's strange about the cables - maybe they are longer because of the different body shape. GD Link to comment Share on other sites More sharing options...
subeman90 Posted November 4, 2006 Share Posted November 4, 2006 he is already a member Link to comment Share on other sites More sharing options...
benebob Posted November 4, 2006 Author Share Posted November 4, 2006 Try www.XT6.net Lots of XT owners over there, and people that have parted out XT's for their 6's.... probably more knowledge than here. That's strange about the cables - maybe they are longer because of the different body shape. GD They shouldn't be any different as the tranny is in the same place in relation to the pedal. Link to comment Share on other sites More sharing options...
nkx Posted November 5, 2006 Share Posted November 5, 2006 now i see that youre not a fan of dealers, but CVM always does me good when im ordering parts. you dont need a vin number, and the guys at the parts counter have been working there for a while, so they know older soobs. Link to comment Share on other sites More sharing options...
benebob Posted November 5, 2006 Author Share Posted November 5, 2006 now i see that youre not a fan of dealers, but CVM always does me good when im ordering parts. you dont need a vin number, and the guys at the parts counter have been working there for a while, so they know older soobs. I've known Ben at CVM for 15 years. Can't get a part that is discontinued though. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now