pearlm30 Posted November 4, 2006 Share Posted November 4, 2006 Can a SVX starter fitsMY 95 2.2 legacy auto? I did some search and nothing really came up? Please help! Thanks Link to comment Share on other sites More sharing options...
Manarius Posted November 4, 2006 Share Posted November 4, 2006 I don't think so. SVX and Legacy parts don't always interchange as nicely as Legacy and Impreza parts. Link to comment Share on other sites More sharing options...
idosubaru Posted November 4, 2006 Share Posted November 4, 2006 the SVX engine will bolt up to any EJ transmission just fine so it should fit just fine but whether the gears mesh and align right is another question. if you get it, you can probably give it a visual and be good to go. EJ22 starters are a dime a dozen though, so i wouldn't waste the time checking myself. Link to comment Share on other sites More sharing options...
ShawnW Posted November 4, 2006 Share Posted November 4, 2006 Should work. Same differential and such so why not. Link to comment Share on other sites More sharing options...
Manarius Posted November 4, 2006 Share Posted November 4, 2006 EJ22 starters are a dime a dozen though, so i wouldn't waste the time checking myself. That was my question from the beginning. Link to comment Share on other sites More sharing options...
pearlm30 Posted November 5, 2006 Author Share Posted November 5, 2006 Thanks everyone I quess I will just have to take the starter out and compare them, will report back with the results. That was my question from the beginning. Link to comment Share on other sites More sharing options...
WoodsWagon Posted November 5, 2006 Share Posted November 5, 2006 You don't have a spare SVX motor to go with that starter do you? The starter should bolt up, same tranny, people do the manual tranny swap and put the same flywheel as the legacy's on. So, Yes, it will bolt up and work. Link to comment Share on other sites More sharing options...
pearlm30 Posted November 5, 2006 Author Share Posted November 5, 2006 I hate to do this, but yes in fact I am parting out one of my SVX. It was in a wreck and trany went out, its beyond saveable........... You don't have a spare SVX motor to go with that starter do you? The starter should bolt up, same tranny, people do the manual tranny swap and put the same flywheel as the legacy's on. So, Yes, it will bolt up and work. Link to comment Share on other sites More sharing options...
pearlm30 Posted November 5, 2006 Author Share Posted November 5, 2006 The SVX starter is longer/bigger than legacy's and It was position differently as well. so it wont work I hate to do this, but yes in fact I am parting out one of my SVX. It was in a wreck and trany went out, its beyond saveable........... Link to comment Share on other sites More sharing options...
pearlm30 Posted November 6, 2006 Author Share Posted November 6, 2006 just found out Subaru starters have 2 designs. I doubt SVX will fit MY 95 Legacy. But after some serious measurement, it looked like it could work. So I mounted the SVX starter on legacy( It would bolt right on ) But the wire had to routed differently. It started right up, and I tried many times and it worked great:banana: Thanks to everyone!!! The SVX starter is longer/bigger than legacy's and It was position differently as well. so it wont work Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now