NoahDL88 Posted November 13, 2003 Share Posted November 13, 2003 I have a DL which as those with DL's know left somthing to be desired in the dash area, my DL dash is at 214,000 miles and i have a GL parts car and dash with 216,000 which gives me 2000 miles to figure out how to get the GL dash in the DL, which brings me to the purpose of this post 1, has anyone done this conversion on an EA-82, and if you have should i give up now. 2, Does anyone have any wireing diagrams or FSM's that they could either post, sell, or let me borrow,i'll gladly pay shipping and a deposit if thats an issue. 3, is the GL and the DL computer different, if i switch the front wiring harness will i also have to switch the computer. 4, the sensors for the fuel, speed, rpm, oil, volts and temp, are they already used by the engine or do i also need to find some sensors like the oil pressure sensor that i already know i need. if you could follow that, first give yourself a pat on the back, and then if anyone has any ideas, help or warnings, i'm all ears. Link to comment Share on other sites More sharing options...
NoahDL88 Posted November 13, 2003 Author Share Posted November 13, 2003 hey guys:wave: if i have to figure this out all by myself i won't share when i'm done:rolleyes: ok i probably will, bump Link to comment Share on other sites More sharing options...
GLCraig Posted November 13, 2003 Share Posted November 13, 2003 i have some answers. 1. I don't know 2. i have some but I need to get to work, I'll have them up in 12hrs or so. 3. Not that I am aware of. 4. I know that oil pressure is different, since you would be going from a dummy light to a gage. You might need to swap out the engine wiring harness too. Link to comment Share on other sites More sharing options...
NoahDL88 Posted November 13, 2003 Author Share Posted November 13, 2003 thanks a bunch Link to comment Share on other sites More sharing options...
edrach Posted November 13, 2003 Share Posted November 13, 2003 Oil pressure guage shouldn't be a problem. Get an oil sender unit and replace the pressure switch. My son and I went the other way (remove guage, install switch on his DL Brat) without any wiring changes required when we installed his rebuilt motor. Of course, he had the correct wiring for the pressure switch in the car already. In retrospect, I don't think I helped you with this, sorry. ---Ed--- Link to comment Share on other sites More sharing options...
NoahDL88 Posted November 13, 2003 Author Share Posted November 13, 2003 Any comment is help, thanks Ed. i just mapped out the back of the dash, both sides with the round connectors and the center section, for all the door open lites and the such, it would be nice to get those all to work although i could live with out a few, but 4wd and the hi beams are pretty necessary. Link to comment Share on other sites More sharing options...
GLCraig Posted November 14, 2003 Share Posted November 14, 2003 i hope these help http://home.comcast.net/~c.moe/diagram_1.pdf http://home.comcast.net/~c.moe/diagram_2.pdf Link to comment Share on other sites More sharing options...
NoahDL88 Posted November 14, 2003 Author Share Posted November 14, 2003 Excellent, i just printed them off, now i get to figure out if this swap is possible or if i should just get custom gauges, thanks a bunch, you are a life saver. Link to comment Share on other sites More sharing options...
GLCraig Posted November 15, 2003 Share Posted November 15, 2003 I'm not sure if those diagrams are 100% accurate. The cd manual uses the same set from 88 and up. Link to comment Share on other sites More sharing options...
NoahDL88 Posted November 15, 2003 Author Share Posted November 15, 2003 So here's what i did, i tore out the entire dash, and swapped it with the other car, not just the insturment cluster but the entire dash, took about a day and all i have left is the headlight and wiper switch but other than that she's good to go, the oil pressure dosn't work but i'm working on that. Link to comment Share on other sites More sharing options...
TimsBrat Posted August 10, 2013 Share Posted August 10, 2013 i hope these help http://home.comcast.net/~c.moe/diagram_1.pdf http://home.comcast.net/~c.moe/diagram_2.pdf Link to comment Share on other sites More sharing options...
TimsBrat Posted August 10, 2013 Share Posted August 10, 2013 Anybody know why this link and a few others that I've tried don't take me anywhere? Link to comment Share on other sites More sharing options...
l75eya Posted August 10, 2013 Share Posted August 10, 2013 Anybody know why this link and a few others that I've tried don't take me anywhere? Because they are from 2003. 1 Link to comment Share on other sites More sharing options...
TimsBrat Posted August 18, 2013 Share Posted August 18, 2013 Because they are from 2003. Link to comment Share on other sites More sharing options...
TimsBrat Posted August 18, 2013 Share Posted August 18, 2013 Thanks, that's too bad I could really use a wiring cheat sheet for swapping out an 84 digital dash with an anologout of a 83 turbo. Link to comment Share on other sites More sharing options...
BratRod Posted August 18, 2013 Share Posted August 18, 2013 I guess he bought the panda brat. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now