baboonia Posted November 10, 2006 Share Posted November 10, 2006 Does anyone know if all 96 A/T Outbacks all had the same differential AKA "rear end"? I just bought a 97 Outback that has a 96 transmission installed....the car is not driveable unless the rear driveshaft is disconnected...I'm thinking the rear end has conflicting gear ratios? Or the rear end is hosed and that is what wrecked the 97 transmission? I'm trying to figure out what is the correct rear end for a 96 so I can get one at the junkyard.... Link to comment Share on other sites More sharing options...
rweddy Posted November 10, 2006 Share Posted November 10, 2006 Does anyone know if all 96 A/T Outbacks all had the same differential AKA "rear end"? I just bought a 97 Outback that has a 96 transmission installed....the car is not driveable unless the rear driveshaft is disconnected...I'm thinking the rear end has conflicting gear ratios? Or the rear end is hosed and that is what wrecked the 97 transmission? I'm trying to figure out what is the correct rear end for a 96 so I can get one at the junkyard.... It is probably an issue with the transmission itself, sounds like there is a issue with the hydraulic clutch pack. Autos under normal conditions split the power 90/10 front to rear. So if you tranny is shot you can remove the rear driveshaft and it will work in front wheel drive. Link to comment Share on other sites More sharing options...
fnlyfnd Posted November 10, 2006 Share Posted November 10, 2006 auto rear = auto rear (4.44) manual rear = manual rear (4.11) Link to comment Share on other sites More sharing options...
avk Posted November 10, 2006 Share Posted November 10, 2006 In '96, 5-speed Outback had a 2.2l engine and the gear ratio could have been different from the rest, but I don't know. Link to comment Share on other sites More sharing options...
johnceggleston Posted November 13, 2006 Share Posted November 13, 2006 auto rear = auto rear (4.44) manual rear = manual rear (4.11) i think the manuals have a 3.90 the 2.5 a/t's have a 4.44 and the 2.2 a/t's have 4.11 but i'm not an expert, just done some research at car-parts.com. you need to research the part number on the top rear driver side of the tranny, and compare it to the id tag on the driver side strut post under the hood. if both are tz102zxxxx then maybe you're ok..... . basicially you need an outback (2.5) tranny for an outback. 2.5's are different than 2.2's. however , 96 was a transisition year, not all outbacks had 2.5 engines. good luck. john Link to comment Share on other sites More sharing options...
Skid542 Posted November 13, 2006 Share Posted November 13, 2006 FWIW, my 96' Outback with a 2.2L and a 5sp Manual has the 4.11 gearing, definitatively. Link to comment Share on other sites More sharing options...
johnceggleston Posted November 15, 2006 Share Posted November 15, 2006 FWIW, my 96' Outback with a 2.2L and a 5sp Manual has the 4.11 gearing, definitatively. it's a good thing i didn't claim to be an expert. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now