ShawnW Posted November 14, 2006 Share Posted November 14, 2006 I found this photo (stole from Webshots thanks to Subarino for it). How did you get it to mount to the trans? Im running an RX trans with an xt type bracket mounted on the tranny. The trans mount end is dead center on the car but the pitch stopper is off to the left. I was thinking I would drill out the existing bolt and run one off to the other side so it would like up. Link to comment Share on other sites More sharing options...
offroadsubaruguy Posted November 14, 2006 Share Posted November 14, 2006 have you thought about maybe bending the stopper? just a thought.... Link to comment Share on other sites More sharing options...
ShawnW Posted November 15, 2006 Author Share Posted November 15, 2006 have you thought about maybe bending the stopper? just a thought.... I think it would eventually give out. Link to comment Share on other sites More sharing options...
NoahDL88 Posted November 15, 2006 Share Posted November 15, 2006 My stopper got bent when i lengthened it, and it eventually broke at the bend. so yeah, if it gets bent, it'll probably fail there, rather quickly. I'm currently not running a pitch stopper on the EJ wagon, which reminds me that i probably should, anyone with an EJ swap figure that one out? Link to comment Share on other sites More sharing options...
ShawnW Posted November 15, 2006 Author Share Posted November 15, 2006 If yours is an ea81 body your in the same boat I am. If its an ea82 body run the xt bracket on the trans and the legacy pitch stopper up to the existing mount. Link to comment Share on other sites More sharing options...
NoahDL88 Posted November 15, 2006 Share Posted November 15, 2006 Yeah, its an EA-82, i didn't think of the XT bracket, i have an RX tranny, maybe that will have the bracket also? Link to comment Share on other sites More sharing options...
Numbchux Posted November 15, 2006 Share Posted November 15, 2006 Yeah, its an EA-82, i didn't think of the XT bracket, i have an RX tranny, maybe that will have the bracket also? nope. RX tranny's don't. and I haven't found an XT in the local junkyards yet, so I don't have a pitch stopper either... the problem they're talking about, is the EA81 pitch stopper is mounted off-center. and the XT bracket is centered. and there's no way to put the EA81 bracket onto the EJ22.... Link to comment Share on other sites More sharing options...
Caboobaroo Posted November 15, 2006 Share Posted November 15, 2006 what if you made a custom pitch stopper. I've seen guys make adjustable ones and such so why not try and fab something up? I have a couple ideas but I need to draw them out and figure out how to work them... Link to comment Share on other sites More sharing options...
ShawnW Posted November 15, 2006 Author Share Posted November 15, 2006 The chain idea isn't half bad it at least would keep the engine from rocking forward. Link to comment Share on other sites More sharing options...
bratsrus1 Posted November 15, 2006 Share Posted November 15, 2006 Hey Shawn This is Jerry, come on over for Thanksgiving and i will build you one for your car for free. Let me know Thanks Jerry Link to comment Share on other sites More sharing options...
northguy Posted November 15, 2006 Share Posted November 15, 2006 I think it would eventually give out. Why not weld in a brace on the bend? Link to comment Share on other sites More sharing options...
WoodsWagon Posted November 15, 2006 Share Posted November 15, 2006 The bracket off of a legacy tranny bolts right up to the EA82 tranny. Use the legacy pitch stopper rod, and you're good. Another detail that tends to say the EJ tranny's really aren't that different. Link to comment Share on other sites More sharing options...
ShawnW Posted November 15, 2006 Author Share Posted November 15, 2006 Hey Shawn This is Jerry, come on over for Thanksgiving and i will build you one for your car for free. Let me know Thanks Jerry Be right over after I fix my rocketship. Link to comment Share on other sites More sharing options...
Numbchux Posted November 15, 2006 Share Posted November 15, 2006 The bracket off of a legacy tranny bolts right up to the EA82 tranny. Use the legacy pitch stopper rod, and you're good. Another detail that tends to say the EJ tranny's really aren't that different. not if it was an automatic. and that still doesn't solve the problem of the offset mount on the EA81 firewall. Link to comment Share on other sites More sharing options...
bratsrus1 Posted November 16, 2006 Share Posted November 16, 2006 Hey Shawn This is Jerry, what part do you need to fix your rocket ship maybe i have that part too? Let me know FedX can deleiver over night. Thanks Jerry Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now