offroadsubaruguy Posted November 15, 2006 Share Posted November 15, 2006 i was looking under the hood of the legacy today and started thinking.... what if i moved the motor and trans back about 1 1/2 inches, made a custom radiator to fit under the latch for the hood, put some super skinny fans on the radiator and you should have room for the svx motor..... it would be a tight fit, but it would fit.... anyone ever thought about this??? it would make for one fast legacy..... lots o fun Link to comment Share on other sites More sharing options...
Manarius Posted November 15, 2006 Share Posted November 15, 2006 It has been done. It required some major modding of the front end to fit the radiator (because you need a bigger one for the EG33). It will bolt in...just fitting everything will be a big issue. Add to that the steering would be a little weird with all that weight. Link to comment Share on other sites More sharing options...
s'ko Posted November 16, 2006 Share Posted November 16, 2006 anything can be done. one problem with the SVX motor is that it's heavier and SVXs are rare. If you happen to have a SVX that you take the parts of out then go for it. If you not then you might want to consider getting a WRX motor, same power w/a smaller package. BW Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now