drquasievil Posted November 27, 2006 Share Posted November 27, 2006 When I put the car into drive while standing still I hear a rattle coming from the front. At first I thought it was something loose like the grill or license plate but when I got down under it, it seems as it comes from the lower part of the engine. Any ideas?. Car drives fine otherwise. Thanks as always. Link to comment Share on other sites More sharing options...
ctoth Posted November 27, 2006 Share Posted November 27, 2006 Heat shields maybe. Link to comment Share on other sites More sharing options...
Manarius Posted November 27, 2006 Share Posted November 27, 2006 Heat shields maybe. Most likely. Link to comment Share on other sites More sharing options...
drquasievil Posted November 27, 2006 Author Share Posted November 27, 2006 Thanks.. Is there a site I can look at a picture? Link to comment Share on other sites More sharing options...
daehttub2000 Posted November 28, 2006 Share Posted November 28, 2006 When I put the car into drive while standing still I hear a rattle coming from the front. At first I thought it was something loose like the grill or license plate but when I got down under it, it seems as it comes from the lower part of the engine. Any ideas?. Car drives fine otherwise. Thanks as always. My 95 Legacy has the old heat shield rattle. The mechanic is offering to put a few rivets into it for $65. I thought that was a lot of money for a few rivets. However, that rattle is really starting to annoy me.... Link to comment Share on other sites More sharing options...
tcspeer Posted November 28, 2006 Share Posted November 28, 2006 I had the ones around the pipe that comes down from the engine to where it turns to the one going to back of car welded at muffer shop for just a few dollars. I had thought about trying J.B. weld on it. My 95 Legacy has the old heat shield rattle. The mechanic is offering to put a few rivets into it for $65. I thought that was a lot of money for a few rivets. However, that rattle is really starting to annoy me.... Link to comment Share on other sites More sharing options...
johnceggleston Posted November 28, 2006 Share Posted November 28, 2006 the y-pipe (shaped like a 'y' or a 'v') bolts to the bottom of the engine and extends back to the catatilic converter section of the exhaust (looks like 2 small mufflers). the long pipe then runs back to the muffler and tail pipe at the rear of the car. the bulky stuff mounted on the y-pipe is/are the heat shield in question. the pipes under neath (inside) the heat sheild are roughly the same diameter as the long pipe that runs to the muffler in the rear. the heat shields get loos and rattle on the pipe inside. the cat converters look like little muflers and are located in the middle section of the exhaust. they to have heat sheilds but less is talked about them on this forum, so they are probably not the problem. sorry i don't have a picture. Link to comment Share on other sites More sharing options...
drquasievil Posted November 28, 2006 Author Share Posted November 28, 2006 the y-pipe (shaped like a 'y' or a 'v') bolts to the bottom of the engine and extends back to the catatilic converter section of the exhaust (looks like 2 small mufflers). the long pipe then runs back to the muffler and tail pipe at the rear of the car. the bulky stuff mounted on the y-pipe is/are the heat shield in question. the pipes under neath (inside) the heat sheild are roughly the same diameter as the long pipe that runs to the muffler in the rear. the heat shields get loos and rattle on the pipe inside. the cat converters look like little muflers and are located in the middle section of the exhaust. they to have heat sheilds but less is talked about them on this forum, so they are probably not the problem. sorry i don't have a picture. They say pictures are worth a 1000 words. Yours beat that by 5. Thanks, Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now