subpilot Posted December 1, 2006 Share Posted December 1, 2006 I have a 85 EA-82T without the knock sensor module. I will spend lunch today calling my local yards to see if anyone has any but in Texas I am probably not going to get lucky. After checking the archives yesterday someone mentioned the posibility of replacing this component with one of a little later vintage but no name was mentioned. Anyone know anything about this? Thanks in advance, Stephen Link to comment Share on other sites More sharing options...
mikeshoup Posted December 1, 2006 Share Posted December 1, 2006 The Knock Control Unit from any 85-86 EA82T should fit. I think even the MPFI non-Turbos have the same knock control unit. XTs just fit them in a different location. Link to comment Share on other sites More sharing options...
Frank B Posted December 1, 2006 Share Posted December 1, 2006 I think it was posted here before that are only two. A one wire, and a two wire. Link to comment Share on other sites More sharing options...
mikeshoup Posted December 1, 2006 Share Posted December 1, 2006 It should be noted, the 1-wire knock systems (87+) have the knock control built into the ECU. Link to comment Share on other sites More sharing options...
subpilot Posted December 1, 2006 Author Share Posted December 1, 2006 "It should be noted, the 1-wire knock systems (87+) have the knock control built into the ECU." This is why I think I have to have an 85-86 version. According to my manual the knock module is connected to but seperate from the ECU. Stephen Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now