Pooparu Posted December 27, 2006 Share Posted December 27, 2006 I'm working on a reproduction design on Gen 2 BRAT stripes, but I don't have a Gen 2 BRAT. If you are local or can come to Portland to let me use your BRAT as a test mule you'll have some free BRAT graphics & free installation too. I just want to make sure that these are going to fit just as the factory intended them to. I don't want to sell them until I have them right. First one to show up get them. Link to comment Share on other sites More sharing options...
northguy Posted December 27, 2006 Share Posted December 27, 2006 Will they be as nice as the ones Ed Dahl sells? Link to comment Share on other sites More sharing options...
Pooparu Posted December 27, 2006 Author Share Posted December 27, 2006 Yes they'll be way nicer. First off I'll be using Gerber's high performance 220 series vinyl & second I'll be using an exact replica of the original layout. Will they be as nice as the ones Ed Dahl sells? Link to comment Share on other sites More sharing options...
75subie Posted December 27, 2006 Share Posted December 27, 2006 if you get them just right, i'll be your first customer. how much do you think they will cost after the first ones are made? Link to comment Share on other sites More sharing options...
GeneralDisorder Posted December 27, 2006 Share Posted December 27, 2006 Do you need one that already has the graphics on it? Mine needs some body work and paint before I go putting the graphics on, but if you want measurements and what not, that's no problem. I have a friend with an 82 that is pretty cherry - he would probably be up for it as well. I'm in West Linn, and he's in NE. GD Link to comment Share on other sites More sharing options...
Pooparu Posted December 27, 2006 Author Share Posted December 27, 2006 I figure about $75 for the set and if people wanted them installed it would be $175. if you get them just right, i'll be your first customer. how much do you think they will cost after the first ones are made? Link to comment Share on other sites More sharing options...
Pooparu Posted December 27, 2006 Author Share Posted December 27, 2006 With or without graphics would be fine. I just need to make sure all the graphics fit perfect. Let me know when you're available and I can swing by with some pen plots to compare what I have to what it needs to be. Do you need one that already has the graphics on it? Mine needs some body work and paint before I go putting the graphics on, but if you want measurements and what not, that's no problem. I have a friend with an 82 that is pretty cherry - he would probably be up for it as well. I'm in West Linn, and he's in NE. GD Link to comment Share on other sites More sharing options...
GeneralDisorder Posted December 27, 2006 Share Posted December 27, 2006 Mine had the horizon stripe, but not the Brat lettering. Just about anytime is good for me. Being unemployed has that advantage. GD Link to comment Share on other sites More sharing options...
mcbrat Posted December 28, 2006 Share Posted December 28, 2006 Yes they'll be way nicer. First off I'll be using Gerber's high performance 220 series vinyl & second I'll be using an exact replica of the original layout. Ed used the original layout as well, except his are just one color vinyl, where the originals were one color vinyl with the second color screen printed on. He also has the horizon stripes. Link to comment Share on other sites More sharing options...
ShawnW Posted December 28, 2006 Share Posted December 28, 2006 Me wantee hatchie SRX stripes. Link to comment Share on other sites More sharing options...
Pooparu Posted December 28, 2006 Author Share Posted December 28, 2006 Do you have some good images of them? If so I can vectorize them and cut them out of vinyl. I'll also try to poke around the infronet to see what I can find. Let me know size and color too. Me wantee hatchie SRX stripes. Link to comment Share on other sites More sharing options...
Pooparu Posted December 28, 2006 Author Share Posted December 28, 2006 I found an ad in the photos section of this site. I'm able to pull the stripes from that. I sould be getting my hatch back soon and I'll do some final sizing and placement junk then. I should have something together in the next few weeks. Now if I could only find the mirror and the spoiler for the SRX I'd be set. Me wantee hatchie SRX stripes. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now