heartless Posted December 29, 2006 Share Posted December 29, 2006 ok, as many of you know, i dropped off the side of the road a while back and damaged my poor little Hildy - just about to get new glass installed and get her back on the road (it sucks being broke) but anyway... the drivers seat got a little torqued in the mishap - the seat back is out of whack - one side leaned back more than the other - my question is this...can i pull the seat out of the car and re-adjust the seat back so it sits properly? or am i stuck putting the old seat back in - had swapped the original for the GL-10 model, which i really like... Link to comment Share on other sites More sharing options...
Jerry DeMoss Posted December 29, 2006 Share Posted December 29, 2006 Ya I think you should be able to get it straight again.I would take it out and lay it face down on the ground so you can get a really good perspective of where you need to start at. Link to comment Share on other sites More sharing options...
heartless Posted December 30, 2006 Author Share Posted December 30, 2006 thanks Jerry, thats sort of what i wanted to hear. gonna give it the ol college try anyway - will report back on my success, or failure if that be the case... Link to comment Share on other sites More sharing options...
daeron Posted December 30, 2006 Share Posted December 30, 2006 these GL-10 seats are spiffy, aren't they? When my dad got his 89 xt6 new, I thought the adjustable height was the bee's knees... I didn't believe my brother's POS subaru had that when I got it from him. oh, how our opinion can change, in time. Link to comment Share on other sites More sharing options...
heartless Posted December 30, 2006 Author Share Posted December 30, 2006 yeah, i do like the GL-10 seat much better than the stock GL seat - a little more comfortable, the adjustable height thing, like the adjustable headrest too...just hoping i can get it re-alighned to work proper again - would suck to have to go back to the stock seat. Link to comment Share on other sites More sharing options...
eponodyne Posted December 31, 2006 Share Posted December 31, 2006 Swap 'em left-to-right and let the passenger worry about it. Link to comment Share on other sites More sharing options...
heartless Posted January 1, 2007 Author Share Posted January 1, 2007 Swap 'em left-to-right and let the passenger worry about it. ah, but that would be defeating the purpose of having that GL-10 drivers seat - it has certain features that the passenger seat does not have - like the height control... Link to comment Share on other sites More sharing options...
daeron Posted January 1, 2007 Share Posted January 1, 2007 height control, lumbar support, and is the headrest adjustable front-to-back on the passenger's side? i cant recall, I havent ridden shotgun in my car that often :-p good luck straightening yours out. My initial point was, yah, these seats are sweet.. hope you get to keep yours. Honestly, its somewhat amazing how one can usually take a seat out of a car and literally rebuild it, springs, foam, upholstery and all.. IF you are willing to spend the cash. more thought went into making them than into say, a La-Z-Boy.... Link to comment Share on other sites More sharing options...
WoodsWagon Posted January 1, 2007 Share Posted January 1, 2007 Why not kick it forward from the back seat? Crude, but it might just work. That's how I straightened my rear sear back, and how I push my floorpans back down, heck I fix a lot of stuff on my car by kicking it! Link to comment Share on other sites More sharing options...
WagonsOnly Posted January 2, 2007 Share Posted January 2, 2007 Yes, both front headrests have up/down/forward/back adjustments on GL-10 seats. And 91Loyale's idea worked for me on a Geo Metro seat once...worst case, a "new" GL10 seat is probably a song from a board member who has one. Link to comment Share on other sites More sharing options...
jeffast Posted January 2, 2007 Share Posted January 2, 2007 i'd have to see the damage but my vote goes to a bfh and ducttape will fix anything Link to comment Share on other sites More sharing options...
heartless Posted January 2, 2007 Author Share Posted January 2, 2007 well, had time to get the seat out of the car yesterday - appears that the pin the right side of the seat back rotates on is bent - should be a fairly easy fix - get the pin from my old seat and swap it out...one hopes anyway... the ol girl is a little closer to hitting the road again - got the "new" used fender on her yesterday as well, light housings back in, etc. Glass goes in friday - after that is an exhaust fix, "new" hood, swap the good tires back onto her and we should be good to go. am going to leave the smashed rear quarter for now - adds "character"! and it doesnt affect driving... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now