J A Blazer Posted December 31, 2006 Share Posted December 31, 2006 Tomorrow I will be replacing the front rotors on my 2000 OBW. Does anyone know the specs for the bolts that you can thread through the rotor hat in order to free it from the hub? TIA Quote Link to comment Share on other sites More sharing options...
porcupine73 Posted December 31, 2006 Share Posted December 31, 2006 I'm pretty sure it's M8. Quote Link to comment Share on other sites More sharing options...
Schwinnbob Posted January 1, 2007 Share Posted January 1, 2007 Hello: He is right it is 8MM. I did mine a month ago and did not even come close to needing to use them. I couple hits with a rubber mallet and they were loose. That was a good thing as only one of mine had the threaded holes. Even though I bought the car with 9K I guess one was replaced at some point before I got the car. Good luck with the top bolts that hold the caliper brackets, they can be a bear! Quote Link to comment Share on other sites More sharing options...
porcupine73 Posted January 1, 2007 Share Posted January 1, 2007 A tip I've heard that supposedly works very well on frozen on rotors is an impact hammer run between the studs. Heck Harbor Freight has one on sale for $5 now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.