honeycomb with 3rd eye?

[carfreak85]

There are two adjusting screws on the top/bottom and sides. Just go look at it and you will see them, they are not camoflauged.

[tsutomu]

There are two adjusting screws on the top/bottom and sides. Just go look at it and you will see them, they are not camoflauged.

 

i kinda figured it was those. oh well ill fix it tomorrow

[carfreak85]

Alrighty, just got back to home base with pics of how to cut the grill for the larger, chrome 3rd eye cover. As you can see in the first picture, cut along the vertical zig-zag things. The second picture shows the angle to cut to clear the opening and closing of the cover. The best advice I can give to those doing this conversion in the future would be to TAKE YOUR TIME! Unless you have piles of spare grills, you can't go hacking them up. I would also suggest using a dremel or small (Tiny actually) recip. saw. Lastly, I would advise making a bunch of small cuts and trim the plastic away rather then large cuts. Make a small cut, test fit the grill on the car to see where it still contacts the cover and trim again. If too much plastic is removed, your grill will snap in half if anything touches it, so leave as much as you can!!

 

 

 

 

[mikeshoup]

Okay, I need a third eye now

 

Or, wouldn't it be a 5th eye on a quad headlight car?

[86BRATMAN]

Thats gotta be one of the coolest looking 4 eye's i've seen with the cyclopse, I like the big badge better with that install

[daeron]

are those hella lights australian market?