skinnyhb Posted January 3, 2007 Share Posted January 3, 2007 i feel like moron having to ask for directions, but could someone point me in the right place where i could find a process for doing my front brakes and rotors on my 88 subaru wagon? i know there has to be one around here, but cant seem to find it. thanks. Link to comment Share on other sites More sharing options...
WoodsWagon Posted January 3, 2007 Share Posted January 3, 2007 Engage E-brake Break loose axel nut. Jack up car and place on jackstands Remove wheel Remove 12mm bolt at lower side of caliper. Release E-brake swing caliper upwards and then inwards to remove from upper pin. Stick caliper under halfshaft. Remove brake pads. Undo 17mm caliper bracket bolts Remove caliper bracket Undo axel nut Pull hub and rotor off of axel end Remove 4 14mm bolts holding rotor to hub Reverse process to assemble. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now