bgambino Posted January 7, 2007 Share Posted January 7, 2007 Finally getting to assembling my 96 2.5 DOHC (head gasket job) Can anyone confirm if Haynes tightening sequence is the latest per Subaru? Here is what my manual says 1--all bolts to 22 FT #'s 2--all to 51 3--loosen all 180 degrees 4--loosen all another 10 degress 5--bolts 1 and 2 only...25 FT #'s 6--Bolts 3,4,5 & 6...132 INCH...! pounds 7--tighten all 90 degrees 8--tighten all another 90 degrees Link to comment Share on other sites More sharing options...
sea#3 Posted January 7, 2007 Share Posted January 7, 2007 Pretty much the same ,just don't go past 180* See attached Sea#3 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now