cookie Posted January 22, 2007 Share Posted January 22, 2007 so I bought a hitch for my 99 Forester from etrailer. It was a bit of a struggle to get the hitch on as usual. It's hard to hold everything above you and get the bolts in. A neighbor and a jack were a big help. I did not have to redrill anything and the powder coat finish looks good. Now I'm going to build one of those tiny trailers from Harbor Freight. I have the box of bolts and fittings on the floor here now, and even though I have not yet found directions it looks pretty self explanatory. A little thousand pound capacity trailer for $245 including tax may make the Forester into a mini pickup truck for me. Last week I hauled several sheets of sheet rock and 22 2x4s and it was a pain. I thought I was really abusing my car until I saw the guy loading cement into his minivan. The sparks from his rear bumper were amusing. I'll let you guys know how the little trailer turns out. In a couple of weeks I expect it to pay for itself as I plan to pick up a 750 pound sidecar rig from the freight docks in Oakland. That will pay for it right there in the delivery charge. Link to comment Share on other sites More sharing options...
Olnick Posted January 22, 2007 Share Posted January 22, 2007 I have the box of bolts and fittings on the floor here now, and even though I have not yet found directions it looks pretty self explanatory. Just like that erector set you has as a kid, eh cookie? Link to comment Share on other sites More sharing options...
cookie Posted January 22, 2007 Author Share Posted January 22, 2007 The last time I built a trailer it was a prototype moblie sales trailer for tose huge early sattleite disks. I went to a junkyard and got a Toranado rear end and welded up a lot of steel channel. I had levelers on each corner and I think the floor was plywood. This has got to be easier. Link to comment Share on other sites More sharing options...
cookie Posted January 24, 2007 Author Share Posted January 24, 2007 I put the trailer together after work except for lights. It took about an hour and a half, but I did cheat and use an air ratchet. I loaned out my Subie so I can't test the lights for a couple of days until the Forester is back. I like to test before I solder. Link to comment Share on other sites More sharing options...
cookie Posted January 25, 2007 Author Share Posted January 25, 2007 Installed lights and wiring harness today. It took another hour. Now we'll see how a Forester pulls it after a DMV trip, Link to comment Share on other sites More sharing options...
Suzam Posted January 25, 2007 Share Posted January 25, 2007 Hey Cookie, which size tires did you get? I bought the trailer that folds in half from harbor freight about 3 years ago. http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=42709 I got the 8" wheel version because I trailer locally and didn't expect any long trips. I've use it about 20 or so times but only a couple at capacity. Worked very well on the back of my 01 Outback Ltd. and figure it's paid for itself and the hitch. Link to comment Share on other sites More sharing options...
soobmater Posted January 25, 2007 Share Posted January 25, 2007 Let us know how it does, because i planned on getting one of those trailers also, for my lifted wagon though. I planned on useing it so i could haul my four wheeler( which isn't that heavy for a quad, its a sportbike-378 pounds) If it works good, that would be great, the reason i wanted it is because it looks like a lightweight trailer, so not to hard on my car to tow it, and more importantly to stop. Link to comment Share on other sites More sharing options...
leadfootracin Posted January 25, 2007 Share Posted January 25, 2007 most of the small trailers with 4 lug 8" wheels use a chev vega/ monza bolt pattern, 13"s will fit the hub. Link to comment Share on other sites More sharing options...
cookie Posted January 25, 2007 Author Share Posted January 25, 2007 I belive it has the 8 inch wheels. I think that should be plenty to haul my sidecar outfit and go to Home Depot. If I was going to do some highway or off road work I would prefer larger wheels. Sure is easy to roll around by yourself compared to other trailers I've had. Good tip on the larger wheel bolt pattern fitment. I'll save that because you never know what you may want to do later. Link to comment Share on other sites More sharing options...
Ranger83 Posted January 25, 2007 Share Posted January 25, 2007 Loctite is your friend. Very cheap at any auto parts store and keeps things together. If it's a critical bolt I usually upgrade it with a US made or higher grade fastener. Some of the low cast Chinese fasteners have very poor strength. Link to comment Share on other sites More sharing options...
cookie Posted January 25, 2007 Author Share Posted January 25, 2007 Yes on the loctite. most of the critcal fasters already use nylocks and cotter pins which kink of surprised me. Link to comment Share on other sites More sharing options...
Skip Posted January 25, 2007 Share Posted January 25, 2007 Cookie, I bought the same trailer to haul my Brat gokart After needing to do some other hauling I came up with this This is the orig post http://www.ultimatesubaru.org/forum/showthread.php?t=56702&highlight=trailer Link to comment Share on other sites More sharing options...
cookie Posted January 25, 2007 Author Share Posted January 25, 2007 that one is very similar to mine. I won't be putting it in the back of my Forester though! Good idea to save bouncing. Link to comment Share on other sites More sharing options...
Skip Posted January 25, 2007 Share Posted January 25, 2007 Thanks, it also saves Turnpike tolls in my area. The tie down loops in the corners help hold loads and hold the deck down. (shown after it had been home for some time) Link to comment Share on other sites More sharing options...
cookie Posted January 26, 2007 Author Share Posted January 26, 2007 Are those loops from a boat shop? I may go that way too. After a mind numbing trip to DMV my trailer is completly registered and my bike half way. When the verification officer asked me for weight I said under 150 pounds and picked up the trailer to demonstrate. At least she laughed. The car does not even seem to notice the trailer other than the rattles on bumps. Link to comment Share on other sites More sharing options...
Skip Posted January 26, 2007 Share Posted January 26, 2007 They came with rubber blocks to lock them into the stake pockets on p/u truck beds seen here http://www.accessconnect.com/prodpage13.htm I like the light weight aspect, with the front wheel castor shown in my post it is great for moving things by hand around the shed ect. I also have a tailer moving dolly. I'm a one man band so lite is good. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now