rallyruss Posted November 19, 2003 Share Posted November 19, 2003 ok so I finally have acess to pics of my honda spring conversion. http://www.shutterfly.com/share/picture_dt.jsp?state=67b0de21a8411174f403&idx=43 that was with stock tires still on it. it now has room for my pugs with brigestone dueler a/t. also rides a lot better with a load in it. springs off 88 accord hatch back. front spring that is. installed in the rear of my car. dimensions are perfect for the interchange. best of all cheap Link to comment Share on other sites More sharing options...
SuperRallyRoo Posted November 19, 2003 Share Posted November 19, 2003 post the pics on the usmb gallery or somewhere that doesn't make u have to sign in to view the pics Link to comment Share on other sites More sharing options...
GeneralDisorder Posted November 19, 2003 Share Posted November 19, 2003 broken link GD Link to comment Share on other sites More sharing options...
rallyruss Posted November 19, 2003 Author Share Posted November 19, 2003 sorry will work on it later. to tired now. Link to comment Share on other sites More sharing options...
baccaruda Posted November 29, 2003 Share Posted November 29, 2003 is it later yet? Link to comment Share on other sites More sharing options...
the_bard Posted November 29, 2003 Share Posted November 29, 2003 Originally posted by rallyruss dimensions are perfect for the interchange. I take it that they pop in fairly easily, then, compared to putting stock ones in. I've never done a set of springs/struts before, but I'm assuming from looking at the repair manual, the strut and spring come in one assembly, right? What's the advantage to using the Honda springs? Link to comment Share on other sites More sharing options...
JWX Posted December 11, 2003 Share Posted December 11, 2003 the link still doesn't work(or maybe it did but now its to late) sorry for bringing up an old thread but theres still a lot of questions about this one Link to comment Share on other sites More sharing options...
soobme Posted December 11, 2003 Share Posted December 11, 2003 Iv'e seen it now, and the Q I have is: are thoes the adjustable 4WD shocks U have in the back, and if so what notch do U have the adjuster on in that pic? Link to comment Share on other sites More sharing options...
rallyruss Posted December 12, 2003 Author Share Posted December 12, 2003 ok I think the link will work for everyone now. give it a try. ok answers to questions. baccaruda- yup its later. home sic from work ( lower back not good today) the bard- advntage is a stiffer spring and sits higher if thats what you want. as for ease of instalation its not to bad. stut assys. need to come appart using a spring compressor. I just undid the top bolt on the junk yard car with the strut hanging and let it loose. dont do this unless you fully understand what can happen. then you disassemble the stock rear subaru assy. and install your springs from the front of the honda accord on the subaru strut cartrige. jwx- what am I missing soobme- it has kyb struts (non adjustable) aplication is from another year/model as kyb is not alowed to sell the replacements for my car because they make them for subaru. stupid legal issues ok the dog keeps whining about a walk. gotta go hope this helps. will try to post some more recent pics tonight. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now