ihscout54 Posted January 25, 2007 Share Posted January 25, 2007 Got my ea81 running finally, well ive got some lifter noise, and it seems like i might have a bad c-rod bearing (got some knock under load) im kinda hoping that the oil pump might be to blame, it has a mechanical oil pressure gauge and the pressure looks good but, that dont always mean anything I have the service history on the car up to 8xxxx miles and it was replaced at like 60k got 110k now, so im hoping the motor isnt soo tired thanks Link to comment Share on other sites More sharing options...
Numbchux Posted January 25, 2007 Share Posted January 25, 2007 I assume since you say you 'finally' got it running that it wasn't running or was disassembled for some time? well, they need some time to get the oil to circulate completely. my EA82 really scared me last fall. but I let it run for about 10 minutes, and the noise had gone away... just an idea...but I don't know a lot about EA81s, so i could be wrong :-\ Link to comment Share on other sites More sharing options...
ihscout54 Posted January 25, 2007 Author Share Posted January 25, 2007 its been sitting for about 4 months, but ive been running it for about a week or so working bugs out its run more than 10 minutes tho Link to comment Share on other sites More sharing options...
Zebisko Posted January 25, 2007 Share Posted January 25, 2007 Have you adjusted the valves yet? Just an idea thrown out. Link to comment Share on other sites More sharing options...
ihscout54 Posted January 26, 2007 Author Share Posted January 26, 2007 have not it was on the list, but if the motor is in need of internal service that will get done at that time. i pulled plug wires and reved the engine it seemed like removing the no. 1 kinda soothed this sound but its faint in fact after i drove it around the block one of my buddys listend to it and he couldnt hear it at all, until you let the clutch out a bit in gear and the rpms drop down to round 4-500 then you could hear it a bit Link to comment Share on other sites More sharing options...
ihscout54 Posted January 26, 2007 Author Share Posted January 26, 2007 Maybe im over reacting? befor i do anything else is 20w-50 the oil i should be using? its what the manual called for or 40w but i havent seen 40w in a while thanks guys -Sam Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now