shift Posted January 30, 2007 Share Posted January 30, 2007 what is it? too lazy to look. im hoping it has the 3 bolt set up Link to comment Share on other sites More sharing options...
baccaruda Posted January 30, 2007 Share Posted January 30, 2007 feeling lazy myself right now, sorry. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted January 30, 2007 Share Posted January 30, 2007 feeling lazy myself right now, sorry. I seriously considered mentioning that I too was feeling lazy - but I was in fact too lazy even to mention it. GD Link to comment Share on other sites More sharing options...
shift Posted January 30, 2007 Author Share Posted January 30, 2007 lol. i guess ill have to go look myself, but the reason i ask is because i saw this chrome pulley kit at pep boys and i wanted to se if it would fit onto my car. if it did, i could have bigger pulleys, more hp and cool chrome pieces on my car Link to comment Share on other sites More sharing options...
Caboobaroo Posted February 2, 2007 Share Posted February 2, 2007 won't work. The crank pulley uses a single bolt through the center and it also slide into part of the front crank seal to prevent oil from coming out. Unless you cut off the pulley and weld on the center fitting so it can slide into the crank seal, then its not going to work. Link to comment Share on other sites More sharing options...
Jerry DeMoss Posted February 2, 2007 Share Posted February 2, 2007 Ya just as cab said.But there is always chrome spray paint. Link to comment Share on other sites More sharing options...
shift Posted February 2, 2007 Author Share Posted February 2, 2007 Ya just as cab said.But there is always chrome spray paint. Link to comment Share on other sites More sharing options...
Snowman Posted February 2, 2007 Share Posted February 2, 2007 Ya just as cab said.But there is always chrome spray paint. Hey, it's proven that stuff magically decreases the weight of the car, dissipates heat better, and on spinning accessories it creates an electromagnetic pulse that fries VTEC engines. Link to comment Share on other sites More sharing options...
shift Posted February 2, 2007 Author Share Posted February 2, 2007 Hey, it's proven that stuff magically decreases the weight of the car, dissipates heat better, and on spinning accessories it creates an electromagnetic pulse that fries VTEC engines. ? i dont get it Link to comment Share on other sites More sharing options...
Uberoo Posted February 4, 2007 Share Posted February 4, 2007 I once had a spray paint chrome exhaust tip.need to do that to my current ride/s. Link to comment Share on other sites More sharing options...
shift Posted February 4, 2007 Author Share Posted February 4, 2007 I once had a spray paint chrome exhaust tip.need to do that to my current ride/s. does the actual chrome paint look like real chrome? never done it on metal Link to comment Share on other sites More sharing options...
Uberoo Posted February 5, 2007 Share Posted February 5, 2007 looks real from about 20-30 ft away... Link to comment Share on other sites More sharing options...
86BRATMAN Posted February 5, 2007 Share Posted February 5, 2007 i used, or should i say tried to use, the spray paint chrome junk before, looks good till either you spray some clear coat on it or wash it the first time, then it went to silver, however this could have been due to cheap paint, another option is the powdercoating route Link to comment Share on other sites More sharing options...
shift Posted February 5, 2007 Author Share Posted February 5, 2007 i used, or should i say tried to use, the spray paint chrome junk before, looks good till either you spray some clear coat on it or wash it the first time, then it went to silver, however this could have been due to cheap paint, another option is the powdercoating route thats what i was thinkin but no $$$ im thinkin i should just have it sand blasted and paint it a cool candy red or subaru blue Link to comment Share on other sites More sharing options...
86BRATMAN Posted February 6, 2007 Share Posted February 6, 2007 have you actually checked priceing on powdercoating, most places shouldn't charge that much for a crank pulley, a place about 2 hours from me has done a few of my buddy's valve covers on some hondas for $80 each, another of my friends "claims" his dad to have a powdercoating setup, yet to be confirmed tho, i personally think the blue like on the valve covers of the ea81's would look quite good Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now