Jack in Norfolk Posted November 21, 2003 Share Posted November 21, 2003 Hey, just theorizing; can you put an aftermarket radio into a sube with the trip computer. I'm talking about the post 85 GL 10s. thanks. -Jack Link to comment Share on other sites More sharing options...
calebz Posted November 21, 2003 Share Posted November 21, 2003 I moved the trip computer when I did mine. I mounted it in the little cubby hole below the ashtray(which happens to be the factory mountin place in the 88-89 GL-10) Here's a link to a pic to illustrate what I did. I used mounting hardware from an 88 GL-10, and had to reroute some of the wiring. Overall, not very difficult. http://usmb.net/albums/albuo11/Picture_004.sized.jpg Link to comment Share on other sites More sharing options...
Jack in Norfolk Posted November 21, 2003 Author Share Posted November 21, 2003 so do all the buttons read sideways now? Link to comment Share on other sites More sharing options...
Scrub2k Posted November 21, 2003 Share Posted November 21, 2003 Yea All the buttons read sideways, i moved mine down to where the ashetray should be since i dont smoke i dont need the ashtray and it seemed a good place to put it. Link to comment Share on other sites More sharing options...
Meeky Moose Posted November 21, 2003 Share Posted November 21, 2003 i found a kit for mine, trip computer stays in teh stock place, and a aftermarket deck fit nicely.. i can take a pics if ya want.. Link to comment Share on other sites More sharing options...
calebz Posted November 21, 2003 Share Posted November 21, 2003 I would like to see that meeky. In mine, a normal DIN sized stereo is too wide to install with the trip computer in place. And yes, the buttons read sideways.. barely noticable since the print is so small anyway. Link to comment Share on other sites More sharing options...
Meeky Moose Posted November 21, 2003 Share Posted November 21, 2003 i'll get some pics of it this weekend.. if the RX i'm pickin up doesn't have the trip computer in that spot then i'll be partin that out as well.. going to be pullin the stereo out of it this weekend anyways, so will get pics of the "Hole" will post back here when i get'em.. Link to comment Share on other sites More sharing options...
Holmes Posted November 21, 2003 Share Posted November 21, 2003 Crutchfield and others sell two installation kits for our cars. One with a trip computer, one without. The one with the computer looks almost identical to the stock one, but the whole for the stereo is bigger. Only problem is you have to cut out the small support bracket on the far left in the stereo cavity to allow the new stereo to fit. A little extra work and it will almost appear stock, besides the 1" extender bezel course. they have some pics of them on http://www.crutchfield.com . Hope this helps. Link to comment Share on other sites More sharing options...
Meeky Moose Posted November 21, 2003 Share Posted November 21, 2003 yeah, thats the kit i used.. well not from crutchfield but looks the same.. have to cut out the spot for the deck.. i did have to bend the support frame for the dash a little.. just take a small ball peen hammer and bend 1/8" and she fits nicely.. Link to comment Share on other sites More sharing options...
Meeky Moose Posted November 26, 2003 Share Posted November 26, 2003 ok got a pic finally... here it is stereo installed Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now