ivantruckman Posted February 21, 2007 Share Posted February 21, 2007 are the toyota truck 4x4 rims the same bolt pattern as the 1/2 ton chevy 6 lug rim . Im headed to the junkyard to find some, are their any preference as to either rim.. toyota vrs chevy...thanks in advance...ivan Link to comment Share on other sites More sharing options...
Roger87ea82t Posted February 21, 2007 Share Posted February 21, 2007 are the toyota truck 4x4 rims the same bolt pattern as the 1/2 ton chevy 6 lug rim . Im headed to the junkyard to find some, are their any preference as to either rim.. toyota vrs chevy...thanks in advance...ivan Chevy, Toyota and Masda 6 lugs are all same bolt pattern......Roger Link to comment Share on other sites More sharing options...
ivantruckman Posted February 21, 2007 Author Share Posted February 21, 2007 thanks roger ,that will help, have a great day Link to comment Share on other sites More sharing options...
Rollie715 Posted February 21, 2007 Share Posted February 21, 2007 Chevy rims typically have a wider offset and will stick out further then wanted. This could cause the tire to hit hard against the rear fender well when turning the wheel. The Toyota, Nissan, and Mazda wheels would be a better choice. Rollie Link to comment Share on other sites More sharing options...
Turbone Posted February 21, 2007 Share Posted February 21, 2007 Depends on the lift. I have 15" Chevy rims and only rub when I have people in the back. But the Yota wheels would be better, only because the valve stems are inside of the spokes which protects them from obstacles. Link to comment Share on other sites More sharing options...
Uberoo Posted February 22, 2007 Share Posted February 22, 2007 I like my chevies!I love the wider track it gives.Makes the car look bigger than it is,and meaner... Link to comment Share on other sites More sharing options...
zyewdall Posted February 22, 2007 Share Posted February 22, 2007 Chevy, Toyota and Masda 6 lugs are all same bolt pattern......Roger Yup. All six lug wheels have the same pattern (except apparently the early dodge dakotas had a smaller 6 lug pattern). But Chevy, Toyota, Mazda, Nissan, Mitsubishi, Isuzu (and their US branded clones in the 70's and early 80's) -- all the same. Apparently it's because the japanese reverse engineered some '30's chevy trucks left there after the war and used alot of their design when they started selling stuff back to us in the 70's. I've heard from a few people that the engines in the 70's landcruisers are very similar to a 1937 chevy pickup. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now