Phizinza Posted March 6, 2007 Share Posted March 6, 2007 Well since my EJ runs in the Brat I have been thinking what to put the EA81dc in. Heres my idea. A 400 - 500 kilo tube chassis road car, Legacy front and rear hubs, custom low sitting suspension, EA81dc (tricked out to the max, on a budget) with a EA82 5sp mixed with a Legacy center diff. It would run 14"s with low profile tires. Seating for two. And maybe, hopefully, get it registerd as a custom car for onroad driving. Think of the styling of the car like the 1960's F1 cars, you know, bullet shaped. Only more like a half crushed bullet. With the motor I was to make two custom manifolds and then stick some kind of webers (got any ideas what two good webers would be for en EA81dc?) on them and run two square air filters sticking out the hood. Maybe paint it red with two GT stripes down the whole car. So what do you think? It's only a thought so far, but in a year or two I might start work on it. I'm going to see if ?I can draw some pictures of what I see it looking like.. This is really just a chat thread for ideas right now Link to comment Share on other sites More sharing options...
monstaru Posted March 8, 2007 Share Posted March 8, 2007 dual 40 or 44 idf's as far as the webers are concerned.lok at the v.w. motors for a guide on that.cheers, brian oh yeah,sounds sick mate,cheers to ya Link to comment Share on other sites More sharing options...
970subaru Posted March 13, 2007 Share Posted March 13, 2007 how about a really small buggy weighing about 1500lbs on some small cheap axles, 33" tires, DR trans, samurai t case, and really minimalist chassis? and leave the motor as is or put it on LPG. and put some highly narrowed ea81 sheetmetal on the front Link to comment Share on other sites More sharing options...
Phizinza Posted March 14, 2007 Author Share Posted March 14, 2007 .... If I wanted a offroad vehicle, I'd choice a different base to start with. I was thinking more onroad, maybe even legal. I was thinking maybe something that looks like this only a two seater and wider. Link to comment Share on other sites More sharing options...
s'ko Posted March 17, 2007 Share Posted March 17, 2007 Right on. What if you took a FWD tranny and made it a mid engine set up. I was thinking of making a Doran. http://www.rqriley.com/doran.html Might even modify the rear wheel to make it electric powered and make a hybrid. Link to comment Share on other sites More sharing options...
Phizinza Posted March 19, 2007 Author Share Posted March 19, 2007 RWD and mid engine would be fun... But... I want this short and I want the seating position to be not on the front grill. Plus, AWD is a good ectra for the sacrificing of mid engine. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now