Uberoo Posted March 11, 2007 Share Posted March 11, 2007 I wired in my EJ harness to various connectors on the EA dash-tach,charge light,CEL,,ignition positive off ignition switch. my question is I have no indicator lights at startup no CEL,no charge,no oil,no nothing in the instrument brezel.When I tried to see if the motor would crank when the battery was just hooked to the charger.Anyway when I tried to see if it would crank I heard this clicking from behind the dash.Also when I tried it I didn't have the ECU memory wire hooked up or the wires from the alternator to the battery.Could that be a cause of the problem?I'll try connecting the memory wire to something tommarow.that and my open fuel line pumped some fuel on the engine(carbie pump still attached:dead: ) need to wire in FI fuel pump and FI lines. Link to comment Share on other sites More sharing options...
testy Posted March 11, 2007 Share Posted March 11, 2007 haha, might be stupid, but are you sure your battery has a charge? Link to comment Share on other sites More sharing options...
suberdave Posted March 11, 2007 Share Posted March 11, 2007 most of the lights and such only get a ground from the 2.2l ECU. the power comes from the car. have you checked that you have power? check fusable links... -=Suberdave=- http://www.suberdave.com Link to comment Share on other sites More sharing options...
Uberoo Posted March 11, 2007 Author Share Posted March 11, 2007 well I did forget to wire the ECU ground and memory wire in:dead: I feel stupid.I guess I just wanted to see if my wiring was correct... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now