tcspeer Posted March 15, 2007 Share Posted March 15, 2007 I am going to order a rebuildt engine from C.C.R. can I order a 96 2.2 engine which is non interference and put it in my 97 which is interference, without running into problems with the computer or other hook ups. Link to comment Share on other sites More sharing options...
nipper Posted March 15, 2007 Share Posted March 15, 2007 Ask CCR they will give you a straight answer. nipper Link to comment Share on other sites More sharing options...
idosubaru Posted March 15, 2007 Share Posted March 15, 2007 yes, swap away. if you want to check a possible item, yours should currently have an EGR valve, make sure the 96 does as well (it should, i think they all do in 1996). it'll plug and play, no computer issues at all. no matter what, i guess you'll have a shop do the install, make sure they keep all the accessories and brackets for the a/c and power steering. just mentioning that in case they yank the motor before getting the new one in. Link to comment Share on other sites More sharing options...
tcspeer Posted March 15, 2007 Author Share Posted March 15, 2007 You two are on top of things, I was wanting an answer soon so I could get my order in but did not expect it that fast. Thanks Link to comment Share on other sites More sharing options...
tcspeer Posted March 15, 2007 Author Share Posted March 15, 2007 They said it would work, but I like to get second and third opinions, I figure someone here has already tried it and knows for sure. Ask CCR they will give you a straight answer. nipper Link to comment Share on other sites More sharing options...
johnceggleston Posted March 16, 2007 Share Posted March 16, 2007 They said it would work, but I like to get second and third opinions, I figure someone here has already tried it and knows for sure. you may have to change tte exhaust y pipe. my 96 2.2L was a single port exhaust. the 95 is supposed to be dual port like the 2.5L outbacks. i'm not familiar with the 97-99 2.2L engines. Link to comment Share on other sites More sharing options...
tcspeer Posted March 16, 2007 Author Share Posted March 16, 2007 My 97 has the exhaust coming down on both sides of the engine also. I have been told by Litha Subaru and C.C.R. that I can make this swap from 96 to 97. Litha told me that there would be some issues swapping a 95 to 97 I did not ask them why, maybe someone here knows. you may have to change tte exhaust y pipe. my 96 2.2L was a single port exhaust. the 95 is supposed to be dual port like the 2.5L outbacks. i'm not familiar with the 97-99 2.2L engines. Link to comment Share on other sites More sharing options...
frag Posted March 16, 2007 Share Posted March 16, 2007 yes, swap away. if you want to check a possible item, yours should currently have an EGR valve, make sure the 96 does as well (it should, i think they all do in 1996). it'll plug and play, no computer issues at all. no matter what, i guess you'll have a shop do the install, make sure they keep all the accessories and brackets for the a/c and power steering. just mentioning that in case they yank the motor before getting the new one in. In case it matters, my 96 2.2L does'nt have an EGR valve. Link to comment Share on other sites More sharing options...
tcspeer Posted March 16, 2007 Author Share Posted March 16, 2007 I dont remember where the EGR valve is mounted but CCR told me I would have to bolt my intake onto the new engine so maybe this will take care of that. Dont the EGR send the exhaust gas back to the intake? I still have a few days to change my order with CCR so I hope to have all of the information I need to make the right choice, I do not want the interference engine of the 97 if I can by pass it with no problems. In case it matters, my 96 2.2L does'nt have an EGR valve. Link to comment Share on other sites More sharing options...
avk Posted March 17, 2007 Share Posted March 17, 2007 2.2 l engines had EGR only with auto transmission and OBDII. On EGR-equipped engines, left cylinder head has a passage drilled into exhaust port from the rear side. Link to comment Share on other sites More sharing options...
frag Posted March 17, 2007 Share Posted March 17, 2007 I dont remember where the EGR valve is mounted but CCR told me I would have to bolt my intake onto the new engine so maybe this will take care of that. Dont the EGR send the exhaust gas back to the intake? I still have a few days to change my order with CCR so I hope to have all of the information I need to make the right choice, I do not want the interference engine of the 97 if I can by pass it with no problems. My Loyale's 1.8L had one but I dont remember how it was mounted. It surely must need a tap on the exhaust manifold somewhere. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now