xoomer Posted March 21, 2007 Share Posted March 21, 2007 81 dl I'm looking to upgrade my coil, I'm having a slight hesitation problem and a miss with good compression fresh wires and cap and rotor, Could be my rockers need adjustment? but I'm thinking upgrading my coil... I work at a CSK Speed Shop, AKA Fancy Shucks... My options are 1. Accel (leaning that way.) 2. Mallory, Expensive (but Proprietary?) 3. MSD Along with that I'm gonna upgrade my wires as well with matching wires. I'm thinking About doing the Fuel injection conversion at some time in the near future so I'm thinking about something that would be compatible upgrades. Also I need to find a Rear brake adjuster that works so I can actually have decent brakes. Anyhow thanks in advance for your help Link to comment Share on other sites More sharing options...
Jerry DeMoss Posted March 21, 2007 Share Posted March 21, 2007 I for one am partial to msd.I have run the msd blaster coil before and now I have the msd blaster ss coil.Both very good coils. Link to comment Share on other sites More sharing options...
calebz Posted March 21, 2007 Share Posted March 21, 2007 If you are leaning toward the accel, do a search on them here before you spend the $$ Link to comment Share on other sites More sharing options...
azsubaru Posted March 21, 2007 Share Posted March 21, 2007 1 vote to avoid Accel - I had bad luck with both the coil and the wires. The coil died completely in about 6 months, and the wires kept burning out. I'm back to OEM coil and NGK wires. Link to comment Share on other sites More sharing options...
Reveeen Posted March 21, 2007 Share Posted March 21, 2007 Before spending money on a coil I would check my distributor shaft/bushings for play. Then put a vacuum guage on it and see if that tells you anything. Link to comment Share on other sites More sharing options...
xoomer Posted March 22, 2007 Author Share Posted March 22, 2007 Good distributer... I don't know about the advance?? Link to comment Share on other sites More sharing options...
Zebisko Posted March 22, 2007 Share Posted March 22, 2007 How do you install a performance coil on there, electrically? I hear you have to use resistors and stuff? Link to comment Share on other sites More sharing options...
[HTi]Dain Posted March 22, 2007 Share Posted March 22, 2007 I have fine luck with my Accel. I think you have to make sure you get the ones made state-side, not in mexico, or wherever. but i've MSD is good shtuff; go witht that! Link to comment Share on other sites More sharing options...
naru Posted March 22, 2007 Share Posted March 22, 2007 How do you install a performance coil on there, electrically? I hear you have to use resistors and stuff? There is no such thing,Strictly for the suckers. Link to comment Share on other sites More sharing options...
carfreak85 Posted March 22, 2007 Share Posted March 22, 2007 +1 for a MSD Blaster 2. I'm running one on my 84 T-wagon and its flawless! Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted March 22, 2007 Share Posted March 22, 2007 Dain']I have fine luck with my Accel. ... Me Too! ... I Has the 8140 High Vibrations Coil' date=' the one that hasn´t Oil, just Epoxi inside... I has it installed in my EA82 since the 90´s, and it Works Very Fine! Just Plug & Play![/color'] See: http://go.mrgasket.com/ProductDetails.aspx?brandId=3&productID=8053968&majID=545&minID=5456&selection=&minselection=4 Link to comment Share on other sites More sharing options...
calebz Posted March 22, 2007 Share Posted March 22, 2007 Me Too! ... I Has the 8140 High Vibrations Coil, the one that hasn´t Oil, just Epoxi inside... I has it installed in my EA82 since the 90´s, and it Works Very Fine! Just Plug & Play! See: http://go.mrgasket.com/ProductDetails.aspx?brandId=3&productID=8053968&majID=545&minID=5456&selection=&minselection=4 Key phrase - since the 90s The ones made in the past few years are crap - verifiably crap. Link to comment Share on other sites More sharing options...
Phizinza Posted March 23, 2007 Share Posted March 23, 2007 I had a Mallory Promaster on the Brat.. Worked great for a Ebay cheapy, but never done anything extra in the way of ponies. It was the model just before they went to internal resistors, forgot what number it was though.... Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted March 23, 2007 Share Posted March 23, 2007 Key phrase - since the 90s The ones made in the past few years are crap - verifiably crap. Yes, it´s True! ... I Asked a Friend who had Problems with his Accel Coil, he said the one he Purchased, said "Made in Mexico" ... Not like Mine... and it Exploded in the Firts Week... Damagin´ pait and hoses on the Engine´s Bay of his Nissan Almera... Link to comment Share on other sites More sharing options...
calebz Posted March 23, 2007 Share Posted March 23, 2007 Yes, it´s True! ... I Asked a Friend who had Problems with his Accel Coil, he said the one he Purchased, said "Made in Mexico" ... Not like Mine... and it Exploded in the Firts Week... Damagin´ pait and hoses on the Engine´s Bay of his Nissan Almera... Yup. Not an uncommon tale. I think mine lasted a whole 10 months. Blew up 70 miles from home while out camping in the middle of nowhere with my wife and kid. Thankfully, a friend whom I met through this board when I moved to TX was kind enough to come down there at midnight with another coil. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now