211 Posted March 26, 2007 Share Posted March 26, 2007 I have a '00 Outback Wagon. I really want to upgrade the rear view mirror to an auto-dimming style with onboard compass and temperature display. How difficult is this to do? I'll have to run wires of course, but are the wires already there? Like tucked up behind the headliner? You know how a lot of manufacturers use the same harness for various models and just omit the extra options leaving the plugs to dangle there alone. Link to comment Share on other sites More sharing options...
86BRATMAN Posted March 26, 2007 Share Posted March 26, 2007 I think those are dealer installed options on the newer cars. The wiring could be there, It's probably 50/50 chance Link to comment Share on other sites More sharing options...
nipper Posted March 26, 2007 Share Posted March 26, 2007 Ive done it in my 1997. If you go to http://www.scoobymods.com/ They have a step by step method in one of thier posts. The toghest part of the entire install for me was running the wires around the dash up to the A pillar. Its a really tight space. You need a powerful flashlight and some flexability to pass the wires. The second toughest is getting them through the firewall. nipper Link to comment Share on other sites More sharing options...
mtsmiths Posted March 26, 2007 Share Posted March 26, 2007 Ive done it in my 1997. If you go to http://www.scoobymods.com/ They have a step by step method in one of thier posts. The toghest part of the entire install for me was running the wires around the dash up to the A pillar. Its a really tight space. You need a powerful flashlight and some flexability to pass the wires. The second toughest is getting them through the firewall. nipper Can't you just cockaroach the power from the dome light, like you do for a map light? Or is there other wiring related to the light sensor and/or compass? The Pretty One wants one for the new Outback as well. Link to comment Share on other sites More sharing options...
nipper Posted March 26, 2007 Share Posted March 26, 2007 You have the power feed, the memory, the temp sensor and the UV sensor. There are also the fuses for the two power feeds. There is also the ground. nipper Link to comment Share on other sites More sharing options...
211 Posted March 26, 2007 Author Share Posted March 26, 2007 Ive done it in my 1997. If you go to http://www.scoobymods.com/ They have a step by step method in one of thier posts. The toghest part of the entire install for me was running the wires around the dash up to the A pillar. Its a really tight space. You need a powerful flashlight and some flexability to pass the wires. The second toughest is getting them through the firewall. nipper Thanks for the tip. Is this the post you're referring too? FYI for you others- you'll have to register to view the images Link to comment Share on other sites More sharing options...
mtsmiths Posted March 26, 2007 Share Posted March 26, 2007 You have the power feed, the memory, the temp sensor and the UV sensor. There are also the fuses for the two power feeds. There is also the ground. nipper Pfui on all that, she's already got an in-dash display, and doesn't really care about auto-dim. All she really wants is a compass ... I'll buy her an Air-Guide. I would like to install an in-dash GPS in the dash slot, but given the cost ... fuggidaboudit! Link to comment Share on other sites More sharing options...
nipper Posted March 26, 2007 Share Posted March 26, 2007 That looks like a factory Unit. i used a aftermarket unit from ebay. http://www.cipausa.com/Autodim%20Files/36400,%2036401,%2036500,%2036501%20Instructions.pdf I see they re wrote the instructions to make it a biit easier. I had to glue the button om my windsheild. It took me two tries to get it right. The first time i did not do prep well and it fell off. Another hint is that life gets much easier if you put the terminals out of their little plastic connectors (i used a tiny screwdriver). Mine came with the UV sensor, which i sort of find useless. nipper Link to comment Share on other sites More sharing options...
211 Posted March 26, 2007 Author Share Posted March 26, 2007 Another question: I found a couple mirrors on ebay. They're OE mirrors and one says it fits a 98-02 Forester the other says it fits a 03-06 Forester. Will either of these fit a 2000 Outback? They look the same with respect to each other- I've never seen an Outback one up close to tell if there's a difference. EDIT: I too could care less for the UV sensor. I just want compass and temp. I've also heard, however, that the OE's auto-dimming tint/technology is less than desirable. Any opinions? Link to comment Share on other sites More sharing options...
nipper Posted March 26, 2007 Share Posted March 26, 2007 Pfui on all that, she's already got an in-dash display, and doesn't really care about auto-dim. All she really wants is a compass ... I'll buy her an Air-Guide. I would like to install an in-dash GPS in the dash slot, but given the cost ... fuggidaboudit! Compass needs a power and a memory. nipper Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now