misledxcracker Posted March 26, 2007 Share Posted March 26, 2007 I want to install XT6 fogs on my 3-door. What all do I need from the XT6 to make it work? Any wires in particular, maybe a switch? What's a good way to run them? Link to comment Share on other sites More sharing options...
Turbone Posted March 26, 2007 Share Posted March 26, 2007 Same as all the other EA82's. Switch, relay, lights. Dont know where you could put the XT switch, but there should be somewhere it could fit. Link to comment Share on other sites More sharing options...
misledxcracker Posted March 26, 2007 Author Share Posted March 26, 2007 Which switch runs the fogs? I never knew... Link to comment Share on other sites More sharing options...
86BRATMAN Posted March 26, 2007 Share Posted March 26, 2007 It should be labeled. Either Foglight, or with the little D\\\ type thing.. Link to comment Share on other sites More sharing options...
Turbone Posted March 26, 2007 Share Posted March 26, 2007 Its on the center console, just before the pocket. Its a rocker switch, thats why I said you might find a place for it. Link to comment Share on other sites More sharing options...
misledxcracker Posted March 26, 2007 Author Share Posted March 26, 2007 Got it! Thanks! Link to comment Share on other sites More sharing options...
Hondasucks Posted March 27, 2007 Share Posted March 27, 2007 It should fit in the blank spot for the rear gate latch, unless his car is 85-86 and has the power gate latch, in which case I THINK there is a blank spot on the left hand side of the steering wheel that the XT foglight switch will just snap into. Link to comment Share on other sites More sharing options...
misledxcracker Posted March 27, 2007 Author Share Posted March 27, 2007 I have a blank spot on the left side for the rocker switch, but I'm still trying to figure out wiring (did 86's come pre-wired for fogs? My old '86 was) Link to comment Share on other sites More sharing options...
86BRATMAN Posted March 28, 2007 Share Posted March 28, 2007 I have a blank spot on the left side for the rocker switch, but I'm still trying to figure out wiring (did 86's come pre-wired for fogs? My old '86 was) It was a factory option, my white 86 brat did not have the wiring, but the maroon one I have now does. Still running the original subie relay! Link to comment Share on other sites More sharing options...
misledxcracker Posted March 28, 2007 Author Share Posted March 28, 2007 Doesnt look like mine's wired for it... So, how do I get them to work? I only have the lights and the switch. What kind of wiring and what kind of relay do i need? also, the donor car is gone. and i didnt take the wiring Link to comment Share on other sites More sharing options...
86BRATMAN Posted March 28, 2007 Share Posted March 28, 2007 Doesnt look like mine's wired for it... So, how do I get them to work? I only have the lights and the switch. What kind of wiring and what kind of relay do i need? also, the donor car is gone. and i didnt take the wiring Go to pretty much any parts store, in the section where the fog lights are sold, look for a fog light wiring kit. Make sure you get one with a relay setup, otherwise you run the risk of burning the switch up, or wire fires. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now