I)arkZrobe Posted April 5, 2007 Share Posted April 5, 2007 I have read through other threads and I have a pretty good Idea of the process. I was wondering if anyone would be willing to post pictures of the correct hose(S) from the engine compartment to attach a garden hose to flush it out. I have a 86 Subaru 1.8 L FI with AC. Thanks for Your Time Link to comment Share on other sites More sharing options...
I)arkZrobe Posted April 5, 2007 Author Share Posted April 5, 2007 I was thinking... Maybe I need to take pictures of my Subaru and maybe have one of you guys just circle the hose in paint. I will get a picture posted in the next few hours. Link to comment Share on other sites More sharing options...
baccaruda Posted April 5, 2007 Share Posted April 5, 2007 this shot is taken from the driver's side of the car - note the starter for reference. My car has a 4" lift (the engine is dropped 4") which is why the hoses are at funny angles.. but it should help you! Link to comment Share on other sites More sharing options...
daeron Posted April 5, 2007 Share Posted April 5, 2007 to clarify: use the two hoses attached to the 90 degree pipes side by side in his picture. Flow one direction, then the other, then the other... that oughta do you good, just hook them back up the way they were. Link to comment Share on other sites More sharing options...
Bucky92 Posted April 5, 2007 Share Posted April 5, 2007 Just be careful when flushing the heater cores..sometimes the added pressure can cause old weak spots to open up....plus the Subarus intake and outlets are vert close together and more times than not a flush doesnt help cause whats going in is coming straight out. Another thing to try is compressed air ...worked wonders on my old POC Taurus..after multiple times using water and the flush kits didnt do anything.. Good Luck and let us know how you make out Link to comment Share on other sites More sharing options...
psylosyfer Posted April 5, 2007 Share Posted April 5, 2007 this shot is taken from the driver's side of the car - note the starter for reference.My car has a 4" lift (the engine is dropped 4") which is why the hoses are at funny angles.. but it should help you! Could not open image in this thread, use this link http://www.angelfire.com/planet/psylosyfer/gto/index.album/heater-hose-out?i=7 Outlet hose marked in red, flush INTO this hose untilthe other hose runs free & clear Link to comment Share on other sites More sharing options...
I)arkZrobe Posted April 5, 2007 Author Share Posted April 5, 2007 Im going to go get a garden hose adapter thingy most likely this weekend "the Subarus intake and outlets are vert close together and more times than not a flush doesnt help cause whats going in is coming straight out." How will I know if this is happening? Link to comment Share on other sites More sharing options...
psylosyfer Posted April 5, 2007 Share Posted April 5, 2007 It worked great for me, And I just held the hose there with a rag wrapped around the 2 hoses. nasty water came out for about 5 seconds then the flow picked way up and the water turned clear. Went from no heat to good heat in minutes. Link to comment Share on other sites More sharing options...
daeron Posted April 5, 2007 Share Posted April 5, 2007 Im going to go get a garden hose adapter thingy most likely this weekend "the Subarus intake and outlets are vert close together and more times than not a flush doesnt help cause whats going in is coming straight out." How will I know if this is happening? When massive amounts of water start gushing out from underneath of your glovebox oh, and Bucky, I love the fact that even in Acronym form, you said piece of "crap" and not piece of "$#it" Link to comment Share on other sites More sharing options...
I)arkZrobe Posted April 6, 2007 Author Share Posted April 6, 2007 Hmm Looked at my Suby and I didnt see those two lines... I will take a picture when I get a chance. Link to comment Share on other sites More sharing options...
daeron Posted April 6, 2007 Share Posted April 6, 2007 this shot is taken from the driver's side of the car - note the starter for reference.My car has a 4" lift (the engine is dropped 4") which is why the hoses are at funny angles.. but it should help you! Re read the post that accompanied the picture. His car is lifted 4"... on your car and mine, there IS no 90* elbow, thats just where the lines come through the firewall. They normally go straight into the engine side of the lines in his picture. Now, look at the picture again, and look at the firewall and the hoses coming out.. ignore the elbow, just trace HIS lines down to the engine. Instead of an elbow, imagine lines going straight from the firewall to the engine. THAT is what you are looking for. Link to comment Share on other sites More sharing options...
dave valiant Posted April 7, 2007 Share Posted April 7, 2007 Did you take the spare tire out? you won't see them with the spare in there. Link to comment Share on other sites More sharing options...
I)arkZrobe Posted April 7, 2007 Author Share Posted April 7, 2007 Thanks I will take a look when its daylight and not snowing... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now