Jump to content
Ultimate Subaru Message Board

steering wheel...


Recommended Posts

You'll need a boss kit for a new steering wheel, keep an eye out on ebay for the type of wheel you want, then get a boss kit to fit your car and the wheels bolt pattern (6 or 5 bolts is the commen sort.)

 

As for seats you are going to have custom up some rails.. But if its a serious project that should be the least of your troubles...

 

Am I just pointing out the obvious? Sometimes I think I'm losing my mind..

Link to comment
Share on other sites

Well, I had a set of 3A Racing seats in my 86 Brat. I used the stock sliders from the decrepid seats that were in it. Drill 4 new holes, one per slider and used the stock screws to hold them on. They bolted right into place perfectly...

Link to comment
Share on other sites

Here ya go. I used the stock hole at the front of the sliders and drilled the new one at the back of them. That way I kept the relation to the pedals and dash close to stock.

 

2007_04120007.jpg

2007_04120008.jpg

These are the redrilled ones, its about an 1" to 1.25" difference in the particular seat model I have.

2007_04120009.jpg

2007_04120010.jpg

2007_04120011.jpg

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...