dedpossum Posted April 21, 2007 Share Posted April 21, 2007 Ok before anyone say's do a search. I know why it's stuck. The selenoid is broken, A new one is on order no worries. But what I'm wondering is if there is a sleezy cheezy way to get it into 2wd until my part shows up? Pictures would be great :0) Thanks. Ded Link to comment Share on other sites More sharing options...
nipper Posted April 21, 2007 Share Posted April 21, 2007 If this is a manual you can drop the driveshaft. nipper Link to comment Share on other sites More sharing options...
Phizinza Posted April 22, 2007 Share Posted April 22, 2007 Is the solenoid broken or the actuator? In other words, little black thing with wires and pipes going into it, or big round metal thing with two pipes? I'm not sure which way round the 4WD lever on the box goes for engauged or disengauged but.. What you can do is attach the vacuum pipe from the manifold (normally goes to the solenoid) to the right side of the actuator and this will pull it off all the time. If you don't follow what I mean.. :-\ I'll have to explain it with pictures. Link to comment Share on other sites More sharing options...
Numbchux Posted April 22, 2007 Share Posted April 22, 2007 I'm assuming this is a push-button Part-time 4WD 5-speed loyale or DL. That's a crucial part of this just bypass it. there's a vacuum line that goes from the engine to one side of the solenoids, and there's 2 lines that go from the solenoids to the diaphragm on the tranny. these lines are the same size. simply plug it into one line for 4WD, and the other for FWD. that's how I've been running my center diff lock for my RX trans for about 8 months now. Haven't had time to wire up the circuits to make the solenoids work how they should.....this works great. hooked up correctly: bypassed: simple as that. might need some trail and error to figure out which is which. although, if it's stuck in 4WD. start the engine, and with the line from the engine still hooked up, then take one of the 2 lines off of the solenoids. the 4WD one will have vacuum. bypass it to the other one. Link to comment Share on other sites More sharing options...
Uberoo Posted April 22, 2007 Share Posted April 22, 2007 I dont see a difference between those two pics... Link to comment Share on other sites More sharing options...
Numbchux Posted April 23, 2007 Share Posted April 23, 2007 I dont see a difference between those two pics... HAHAHA, fooled you!!!! I actually posted the same pic twice to see if anyone was paying attention good catch, fixed it. :-\ Link to comment Share on other sites More sharing options...
Phizinza Posted April 23, 2007 Share Posted April 23, 2007 HAHAHA, fooled you!!!! I actually posted the same pic twice to see if anyone was paying attention good catch, fixed it. :-\ Hahaha... Link to comment Share on other sites More sharing options...
dedpossum Posted April 26, 2007 Author Share Posted April 26, 2007 It's the selenoid. In the second picture that was posted the selenoid that takes you out of 4wd is broken, so that you can't even put a line on it. I've looked in every junk yard around here can't find one, so I had to order it. Gonna take awhile to get it so i'm just wondering if there is a way to jury rig it in the meantime. ded. Link to comment Share on other sites More sharing options...
Numbchux Posted April 26, 2007 Share Posted April 26, 2007 It's the selenoid. In the second picture that was posted the selenoid that takes you out of 4wd is broken, so that you can't even put a line on it. I've looked in every junk yard around here can't find one, so I had to order it. Gonna take awhile to get it so i'm just wondering if there is a way to jury rig it in the meantime. ded. don't need to plug anything into the solenoid. just bypass it. Link to comment Share on other sites More sharing options...
dedpossum Posted April 26, 2007 Author Share Posted April 26, 2007 Would it be possible to get a picture maybe? ded Link to comment Share on other sites More sharing options...
Phizinza Posted April 27, 2007 Share Posted April 27, 2007 You know the big actuator? The thing that has the cable attached to it that pulls the lever on the trans? Pull your vacuum hose from the solenoid (one that goes from the solenoid to the manifold) and put it on the 'back' side of the actuator I think, or is it the front? Anyway, just put it on the side that disengauges 4WD. Link to comment Share on other sites More sharing options...
Numbchux Posted April 27, 2007 Share Posted April 27, 2007 Would it be possible to get a picture maybe? ded that's what the picture above is of. first one is how it's hooked up stock, second one is bypassed to one side. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now