teasdam Posted April 25, 2007 Share Posted April 25, 2007 I've procured a radio harness from an '01 Outback (LL Bean), and was hoping someone could help me ID these harness wires so I can wire it in my loyale. I really only need to know 7 of these wires for the loyale (batt power, acc power, left spkr [2], right spkr [2], and ground) 8 of the wires are twisted in pairs... RY/WB G/BrW LY/RW WR/RB remaining single wires are... BW YG B (heavier gauge) G purple LR Greatly appreciate someone telling me which of these harness wires match the 7 I need! Link to comment Share on other sites More sharing options...
edrach Posted April 26, 2007 Share Posted April 26, 2007 Most radios and adapter harnesses have standarized wiring. If your harness is standard, here's the code: Red 12Volt Ignition/accessory Yellow 12 Volt Battery/memory Black Ground Blue Power antenna Blue/wht Amp turn on Black/wht Amp ground Orange Illumination Orange/wht dimmer Brown Phone mute Gray Right/front + Gray/blk Right/front - White Left/front + White/blk Left/front - Violet Right/rear + Violet/blk Right/rear - Green Left/rear + Green/blk Left/rear - You might find more information and available harnesses at http://www.metraonline.com. Link to comment Share on other sites More sharing options...
avk Posted April 26, 2007 Share Posted April 26, 2007 Thanks to Scoobymods: http://www.geocities.com/svxdc/Legacy-pinout.htm Link to comment Share on other sites More sharing options...
edrach Posted April 27, 2007 Share Posted April 27, 2007 Cool, another good thread to drop into the USRM. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now