hatchsub Posted May 8, 2007 Share Posted May 8, 2007 Hey i kno this subject has been discussed before cause i did a search but i didnt see anyone giving tips on how they did the bracket. My throttle cable bracket is too far away from the carb so the carb will not close all the way. I tried bending it closer but it still isnt enough. Anyone got any suggestions or tips to how to make it work? Link to comment Share on other sites More sharing options...
[HTi]Dain Posted May 9, 2007 Share Posted May 9, 2007 HEll yeah, I fixed that thing good! check it out! I wish I put a tape measure next to it (duuuuh) but I fab'ed a piece of steel about 3in. if i remember right, and took the throttle cable bracket for the Carter Weber set-up, and tac welded it together. I also had to do some extra bending in the piece I made, obviously. infact, you could easily just fabricate the whole entire thing! Link to comment Share on other sites More sharing options...
Durania Posted May 9, 2007 Share Posted May 9, 2007 Here is a pic of mine for reference, I didn't install it so I wouldnt know too much. Link to comment Share on other sites More sharing options...
hatchsub Posted May 9, 2007 Author Share Posted May 9, 2007 Ok thanks guys. I'll have to look around for my carter-weber throttle bracket and see if i can make something work with that. Link to comment Share on other sites More sharing options...
[HTi]Dain Posted May 9, 2007 Share Posted May 9, 2007 Let me know if you would want me to fabricate you something. It would be fairly cheap to ship a small bracket. Link to comment Share on other sites More sharing options...
hatchsub Posted May 9, 2007 Author Share Posted May 9, 2007 If you could do something fairly cheap for me that would be fantastic. Ill give you a PM. Any chance it could be done before Carlisle (May 20th)? Link to comment Share on other sites More sharing options...
hatchsub Posted May 13, 2007 Author Share Posted May 13, 2007 Just letting everyone kno that i had a local machine shop make me up a custom bracket for the throttle cable. I made a template out of cardboard and gave it to him and he made me a really nice one out of steel. Thanks for the offer again [HTi]Dain Link to comment Share on other sites More sharing options...
[HTi]Dain Posted May 13, 2007 Share Posted May 13, 2007 Just letting everyone kno that i had a local machine shop make me up a custom bracket for the throttle cable. I made a template out of cardboard and gave it to him and he made me a really nice one out of steel. Thanks for the offer again [HTi]Dain Your welcome. I would like to see a pic of it! Link to comment Share on other sites More sharing options...
hatchsub Posted May 13, 2007 Author Share Posted May 13, 2007 Dain']Your welcome. I would like to see a pic of it! Ok I'll get a pic as soon as i can and post it up. It probably wont be for about a week or so though as im still struggling to get everything in order for Carlisle. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now