jonas Posted May 10, 2007 Share Posted May 10, 2007 do you have to fab your own or can you get one bolt on pre-made? weberizing my EA81. no prob. fabbing but i'm lazy so looking for the easy route. and will i need some new vac. line rubber? Link to comment Share on other sites More sharing options...
hatchsub Posted May 11, 2007 Share Posted May 11, 2007 Look at the bottom of this post for similar threads. To answer your question there is a bracket that can bolt to the back two bolts of the weber that ive heard of. But what most people on this board (me included soon) do is to make their own. As for the vacuum line rubber you will need to get vacuum plugs..a good amount of them. When you put the weber on you will be able to eliminate a lot of emissions stuff you dont need anymore. You will not need any more vacuum hoses i dont think unless while your in there you want to replace some of your old dried out ones. Also this is just personal preference but i would keep the EGR valve as it helps rather than hurts your engine. Its more work to take it off and why bother if its working properly. Link to comment Share on other sites More sharing options...
LiftedEA81 Posted May 11, 2007 Share Posted May 11, 2007 Jonas, i was going to tell you about this but then forgot. When i had my weber installed, i didnt have the bracket for the throttle cable. What i did was goto the junkyard, and got another stock bracket and removed it from the intake manifold. Then I bolted that to the top of the bracket on my hatchback. IT worked perfectly and raised the mounting location for the throttle cable enough to work for the weber. To take up the slack, i just bent the extension alittle until it fit snug. Link to comment Share on other sites More sharing options...
jonas Posted May 11, 2007 Author Share Posted May 11, 2007 thanks guys. i'll prob. be fabbibg as the j/y's 'round here have motors and tranny stripped before they hit the lot. *frowns* Link to comment Share on other sites More sharing options...
[HTi]Dain Posted May 11, 2007 Share Posted May 11, 2007 This is what I fab'ed for my self. I'm going to make one for Hatchsub, if I can get it to him in time... Link to comment Share on other sites More sharing options...
daeron Posted May 11, 2007 Share Posted May 11, 2007 deja who? I hate to complain, but jonas.. as of my posting here, if you click on page 2 of this forum, and look at the third thread from the top, you will see a post less than a week old dealing with this exact same issue. It took me a moment to figure out why, when I clicked the link to take me to new posts in this thread, it started me out at the beginning... I hate to yell "search" but that thread was last posted in ~24 hours ago. Link to comment Share on other sites More sharing options...
mcbrat Posted May 11, 2007 Share Posted May 11, 2007 here's the bolt on one... available here... http://www.jameng.com/products/index.phtml?section=13 Link to comment Share on other sites More sharing options...
[HTi]Dain Posted May 11, 2007 Share Posted May 11, 2007 here's the bolt on one...available here... http://www.jameng.com/products/index.phtml?section=13 Ahh, sweet. There ya go! Link to comment Share on other sites More sharing options...
jonas Posted May 11, 2007 Author Share Posted May 11, 2007 deja who? I hate to complain, but jonas.. as of my posting here, if you click on page 2 of this forum, and look at the third thread from the top, you will see a post less than a week old dealing with this exact same issue. It took me a moment to figure out why, when I clicked the link to take me to new posts in this thread, it started me out at the beginning... I hate to yell "search" but that thread was last posted in ~24 hours ago. yell all you want. if you actually read and comprehend what is being written, you should realize i am asking a totally seperate question. i am asking if i can buy a bracket, because i am lazy, or if i have to fab one. other dude is asking how to get his current bracket to work. seperate issues. Link to comment Share on other sites More sharing options...
jonas Posted May 11, 2007 Author Share Posted May 11, 2007 yell all you want. if you actually read and comprehend what is being written, you should realize i am asking a totally seperate question. i am asking if i can buy a bracket, because i am lazy, or if i have to fab one. other dude is asking how to get his current bracket to work. seperate issues. sorry for that post D. i'm just tired and cranky. 60hrs in 4 days at work with today (supposed to be day off, grr) to go. again i apologize. shouldn't have been a wongleflute to you. Link to comment Share on other sites More sharing options...
daeron Posted May 11, 2007 Share Posted May 11, 2007 sorry for that post D. i'm just tired and cranky. 60hrs in 4 days at work with today (supposed to be day off, grr) to go. again i apologize. shouldn't have been a wongleflute to you. Its all gravy.. you *were* right, the other thread mentioned nothing about purchasing one, beyond [HTi]Dain's offer to fab one up... and THAT post was the one that led me astray. I got a little peeved for a moment, then read both threads side by side and realized it was water off a duck's back. An apology is more than enough. Link to comment Share on other sites More sharing options...
[HTi]Dain Posted May 11, 2007 Share Posted May 11, 2007 Its all gravy.. you *were* right, the other thread mentioned nothing about purchasing one, beyond [HTi]Dain's offer to fab one up... and THAT post was the one that led me astray. I got a little peeved for a moment, then read both threads side by side and realized it was water off a duck's back. An apology is more than enough. Heh, Can a guy really apolagize for being a man :cool: (its a joke, just in case). Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now