mellow65 Posted May 28, 2007 Share Posted May 28, 2007 Well the saga continues, with the words of encouragement I went to work seeing what i could do with the front end of my wagon. Lets just say 100% improvement. I think right now I could mount a headlight and it wouldn't be pointing at the ground. Not all of the places I needed to bang on were accessible. And are going to have to wait till I take the motor out. But for a guy with no body skills and no plans on learning any, I have to say, not bad. How my driveway sat for 6 hours. My thing that i made to hook up to the bumper mount and the come along. Yes that is a big hole in my frame. This is where it was folded over. And no matter how much i pulled or put heat to it or banged on it, it wouldn't move. So I figure remove the folded parts on the sides and the top shouldn't be strong enough to resist the heat, come along and the BFH, and it worked, pretty well anyways. I am going to put some metal patches in the holes later on. Factory lower radiator support, FUBAR. Replacement one, 1/4" C channel, just tacked in for right now. There was no way of getting the factory one even close to being strait. So I took someones advice and made a new one. The good side and what it is supposed to look like. The bad side and not what it's supposed to look like. But looks much better then when I started. Just a strait down of the battery spot. This needs some banging around, but will have to wait till I pull the motor. Why yes that is my tire you can see through my frame. Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted May 28, 2007 Share Posted May 28, 2007 looks good keep us posted on the rebuild and offroad mods Scott Link to comment Share on other sites More sharing options...
GJTaranto Posted May 28, 2007 Share Posted May 28, 2007 OMG that is hilarious. I was laughing pretty good. Looks like something I would do. Keep up the good work! I bet all your neighbors looked at you funny all day. Link to comment Share on other sites More sharing options...
mellow65 Posted May 28, 2007 Author Share Posted May 28, 2007 OMG that is hilarious. I was laughing pretty good.Looks like something I would do. Keep up the good work! I bet all your neighbors looked at you funny all day. Nothing like sitting out side with a BFH and beating the sh*t out of your car, then pulling out the chop saw and going to town, and then air compressor running nonstop. But fortunately my neighborhood is kind of a upper end ghetto. The guy across the street feels he should floor his no muffler truck every time he starts it. And then there is the motorcycle shop that is always winding out the 2 strokes in back of their shop. I like my neighborhood, I fit in just fine. Hell I have had a car in front of my house that has been there for over 6 months and no one has said anything. Link to comment Share on other sites More sharing options...
daeron Posted May 28, 2007 Share Posted May 28, 2007 Good Show, Old bean!!! Seriously, thats some great work!! I hope it comes together halfway well! I'm REALLY glad you went ahead and kept trying, man. A touring wagon isn't something to pass on lightly, and it looks like you had more aces up your sleeve than you thought. Good luck on further progress, and dont forget that its wise to do a little painting on exposed metal within a couple days, just to avoid surface rusting. (any more knowledgable advice on this front? its more of an idea on my part than "informed advice") Link to comment Share on other sites More sharing options...
86BRATMAN Posted May 28, 2007 Share Posted May 28, 2007 OMG that is hilarious. I was laughing pretty good.Looks like something I would do. Keep up the good work! I bet all your neighbors looked at you funny all day. This is something I did to my mom's legacy. I smashed a deer at 80mph last april in it. I knew if it was turned in to insurance it would be totalled for sure. A tow cable, tree, bf rubber hammer, and a couple hours made it good as new. Sort of... Link to comment Share on other sites More sharing options...
86BRATMAN Posted May 28, 2007 Share Posted May 28, 2007 And you thought this car was doomed to be parted out. LOL. And baby look at it now... Link to comment Share on other sites More sharing options...
Turbone Posted May 28, 2007 Share Posted May 28, 2007 Heh, we'll make a body man out of you yet:headbang: Link to comment Share on other sites More sharing options...
Flowmastered87GL Posted May 28, 2007 Share Posted May 28, 2007 This is something I did to my mom's legacy. I smashed a deer at 80mph last april in it. I knew if it was turned in to insurance it would be totalled for sure. A tow cable, tree, bf rubber hammer, and a couple hours made it good as new. Sort of... You should have reported it to insurance, bought it back for $50 and THEN fixed it (like I did with my GL) Yes the title gets branded but you get a nice fatty check too Link to comment Share on other sites More sharing options...
86BRATMAN Posted May 28, 2007 Share Posted May 28, 2007 You should have reported it to insurance, bought it back for $50 and THEN fixed it (like I did with my GL) Yes the title gets branded but you get a nice fatty check too I did that with one of my Integra's a few years back. But mom wouldn't hear of it. Link to comment Share on other sites More sharing options...
Bucky92 Posted May 28, 2007 Share Posted May 28, 2007 Looking good!! I wish I could help ( I so love doing body work ) Plus i want someone to show me the basics of welding darn it!! Just be patient..thats one of the keys to body work. Link to comment Share on other sites More sharing options...
mykingcrab Posted May 28, 2007 Share Posted May 28, 2007 Nice work bro, Its amazing how much you can move steel around with some insentive. Link to comment Share on other sites More sharing options...
mellow65 Posted May 28, 2007 Author Share Posted May 28, 2007 Well the old girl is going to have to sit in the corner till next weekend when i get a chance to smack it around some more. And truly I might have to wait till I pull my motor till I do any more straiting work. I need to be in the engine bay to get some of the angles that I need to be at. You know I always knew these wagons were rare, but I found an even rarer option inside, a working clock. Man now i got to fix it. Link to comment Share on other sites More sharing options...
Tom63050 Posted May 29, 2007 Share Posted May 29, 2007 OMG that is hilarious. I was laughing pretty good.Looks like something I would do. Keep up the good work! I bet all your neighbors looked at you funny all day. I bounced my 1986 MR2 off a guardrail in the rain once. Didnt do me a lot of good either. Got it home. Drilled a hole in the subframe that held on the headlights and stuff. Stuck an eyebolt thru it, with washers so it wouldn't rip out. Attached a big rope to eyebolt. Other end of rope to telephone pole. Backed up a few times. Not show quality, but a lot cheaper than a body shop. Where there's a will to be cheap, there's a way to be cheap. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now