Gloyale Posted June 6, 2007 Share Posted June 6, 2007 I have a 93 Legacy wagon, non-ABS, Disk rear brakes. It needs the rear wheel bearings replaced bad. Someone has offered me Impreza rear hubs with good bearings in them for a bargain price. Would I be able to use these on the Legacy If I swap out the drum setup from the Impreza with my Legacy Disks? Are the Wheel bearing setups and hubs the same, minus the brakes? Link to comment Share on other sites More sharing options...
jamal Posted June 6, 2007 Share Posted June 6, 2007 Pre-99 impreza rear bearings are not as good, and a new backing plate will have to be pressed on for the rear discs. I'd keep looking. Link to comment Share on other sites More sharing options...
Gloyale Posted June 7, 2007 Author Share Posted June 7, 2007 Pre-99 impreza rear bearings are not as good, and a new backing plate will have to be pressed on for the rear discs. I'd keep looking. Uhh... If they are the same bearing as my 93 legacy then I really wouldn't be any worse to use Impreza bearings. And I know on my EA cars the backing plate while tightly fitted, isn't impossibe too remove and reinstall. I just need ot know if it will work. Are the Hubs/bearings the same? Same geometry and mountings? I can swap the discs, but are the bearings and hubs the same? Link to comment Share on other sites More sharing options...
jamal Posted June 7, 2007 Share Posted June 7, 2007 yes the knuckle is the same and will bolt up, but an Impreza uses ball bearings and the Legacy uses a tapered roller bearing. Much better, especially for the heavier car. A set of Legacy rear disc knuckles with usable hubs should be pretty easy to find and not very expensive. I got a front one for $35 shipped awhile back through an online junkyard search. Also check local shops in your area that work on Subarus or build rally cars or something. Usually they have entire rear ends for pretty cheap. Link to comment Share on other sites More sharing options...
Gloyale Posted June 7, 2007 Author Share Posted June 7, 2007 yes the knuckle is the same and will bolt up, but an Impreza uses ball bearings and the Legacy uses a tapered roller bearing. Much better, especially for the heavier car. A set of Legacy rear disc knuckles with usable hubs should be pretty easy to find and not very expensive. I got a front one for $35 shipped awhile back through an online junkyard search. Now that's what I was asking for. I guess I wont use them then. Also check local shops in your area that work on Subarus or build rally cars or something. Usually they have entire rear ends for pretty cheap. There really aren't any shops like that around here. There is a Machine shop that happens to be familiar with Soobs and has a bore plate for the engines. But otherwise there aren't any "tuner" shops around here. Perhaps in Chicago, but they want big $$$$$. 1st gen Legacies are starting to get really hard to find around here too. And I Wouldn't want a bearing from them anyhow. Any car that's 15 years old here in Wisconsin is rusty and worn out. My car has no rust because I brought it out from Oregon. I'll probably just buy new bearings and have them pressed into the hub. I was only thinking of the used swap because they were really cheap and supposedly had good bearings from the out west, no rust. Link to comment Share on other sites More sharing options...
jamal Posted June 7, 2007 Share Posted June 7, 2007 Check the local forum on nasioc, WRX or whatever hubs will work. http://forums.nasioc.com/forums/forumdisplay.php?f=96 http://forums.nasioc.com/forums/forumdisplay.php?f=12 Link to comment Share on other sites More sharing options...
Gloyale Posted June 8, 2007 Author Share Posted June 8, 2007 Check the local forum on nasioc, WRX or whatever hubs will work. Yeah, see, I don't want hubs from around here cuase of the salted roads. Link to comment Share on other sites More sharing options...
jamal Posted June 8, 2007 Share Posted June 8, 2007 I'm going to a local shop this afternoon to pick up some things. I'll see if he has some rear hubs. Link to comment Share on other sites More sharing options...
jamal Posted June 10, 2007 Share Posted June 10, 2007 My friend has a set of rear knuckles from an 05 WRX. $100+shipping. PM me if you want them. Link to comment Share on other sites More sharing options...
Gloyale Posted June 10, 2007 Author Share Posted June 10, 2007 Those would bolt on to my 93 Legacy? I really just need to replce worn rear bearings. I don't need to upgrade. 100 plus shipping would put me very close to the price of installing brand new bearings. Link to comment Share on other sites More sharing options...
jamal Posted June 10, 2007 Share Posted June 10, 2007 They bolt right up and aren't any different than yours. The parking brake is taken off so you'd have to transfer them over. Link to comment Share on other sites More sharing options...
2.5GL Posted June 11, 2007 Share Posted June 11, 2007 Those would bolt on to my 93 Legacy? I really just need to replce worn rear bearings. I don't need to upgrade. 100 plus shipping would put me very close to the price of installing brand new bearings. Really? where did you get a pair of Subaru bearings and seals for around $100.00? Wholesale puts that price near $175.00, on a good day, employee cost stands at over $140.00....Unless, that is, my dealer contact got it wrong... if that's the case, "Thanks, Lithia" Lewis Link to comment Share on other sites More sharing options...
Gloyale Posted June 12, 2007 Author Share Posted June 12, 2007 Really? where did you get a pair of Subaru bearings and seals for around $100.00? Wholesale puts that price near $175.00, on a good day, employee cost stands at over $140.00....Unless, that is, my dealer contact got it wrong... if that's the case, "Thanks, Lithia" Lewis I said that it puts me "close" the cost of shipping from California to Wisconsin on heavy items like these would not be cheap, possiblly $40-50 so about $150, plus waiting a week. Autozone lists a bearing kit(pressumeably with seals) for about 75$. so $150 for both, plus the pressing cost. Not much more really for Brand new as opposed to used. Anyway, I did the job already. But thanks to everyone. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now